开云体育

I don't want to hijack the thread but. To David B, I sent you a PM, not sure if you got it or not but thank you for the videos to help me work out the issues with my saw. Too damn cold right now but I

I hope you are getting well paid for this. Sounds boring as hell to me. David Best - Sent from my iPad

So how wide is this assembly going to be. 4 or 5 sets mean 4 to 5 feet mib width, if grooves are on the edges of the board. Can you really do that w/o and support in the middle? If you can live with

Mount urethane feeder wheels on spindles above the cutters to maintain down pressure as you cut. Rig up a sled with pneumatic cylinders to push the slats thru. You might want to find someone with a

Can you use 50mm (1.968”) wide instead of 2”? If so, you could get two of the Hammer rebate cutters #500-04-003 and stick them on a 30mm shaft with spacers between. As for hp, they are aluminum,

Forgot to add some details. The spacing needs to be precise between the grooves, and we need to make 18,000 (thousand) of these, hence the dedicated machine.

Jason with all this 3d printing talk I didn’t even thank about that. I am in the same camp as a former multi-router owner it is the only one I am considering, would love to get my hands on the

Imran, Could be, I mostly only ever see/use the io slices seen in my pic and on circuit board soldered connectors I typically only have see screw terminal connectors. Regards, Mark

I was talking with someone who has used the Multirouter, and now has the Pantorouter. He explained one feature that seems to be better. The tenon templates on the PR are tapered, so you can adjust

Hi, I need to build a single purpose tool to cut two grooves about 3/32 deep, 2" wide, and 7-3/4" apart at the inside (for RR ties in a 2-1/2" scale model RR club). ?I'm thinking of using stacked

Mark, The other connector (smaller) worked with just pushing. This one appears to only work with pushing down, at least with a screwdriver. Maybe, with proper tool you can just push it. I was afraid

Also know you can just push the driver in and it will wedge it open Regards, Mark https://www.instagram.com/kessler_woodworks/

Just to follow up, I'm not able to get the photos off that old computer (now I remember why I replaced it). If you are serious about going the Ivac route and really need to have photos, let me know.

I looked at the Woodpeckers Multirouter, a couple of weeks ago, but decided on the metal Pantorouter ($1800) and absolutely loving it. It’s super easy to setup and repeatability an accuracy is

Thanks a lot for your feedback and all the pictures, that is helpful, Bill

Bill, I really like the FAT 300 and use it for many purposes including using it as a work table with my Festool sys vac clamps. The ability to vary the height as been a big benefit as opposed to

???

Imran, Yes that is what I am talking about. Joe

Hi Joe, I will look for it but I am pretty happy with the way it works. Are we talking about drill bit being perpendicular to the front fence and the horizontal movement of bit to be level with table

Rice, Cannot offer an answer, but I have a question for you :). How do you like your fat300? Do you see it as a workbench with some vacuum clamps? Bill