开云体育

I would like to get the 3d file as well please. My email is elwinkershaw@.... Much Thanks! Elwin Kershaw

I started with a California Air Tools compressor, but I tended to leave it on and the valve that releases the head pressure stuck one day and I came into the shop and the unit had almost caught fire,

Brian, I couldn’t agree more. When my dads' 40 gallon kicks on it seems like I have never heard the noise before. It startles me every time!

If that’s all the sand blasting you intend to do, then definitely look at no more than a 5hp unit. As for the smaller unit, look for quiet…. period. The most irritating noise in the shop is the

Joe, Fantastic info. This is a very understandable explanation of CFM. Thank you for taking the time to explain! Anthony

Seems that way, I run the small compressor at a slightly higher pressure than the “regulated” line pressure coming out of the big compressor. This way it seems the large compressor only feeds air

Anthony, there are compressor brands and even levels within the brands. As an engineer I have a problem in that I always need to learn a ton about a topic before I make the plunge. On air compressors;

Bill, I did not know auto position had something to do with auto clean as well. Do I understand correctly that in this position you can autostart/stop with a relay? Imran

The RL models that offer this automated position are build to have the RL start and stop automatically for the auto clean feature as far as I understand. So, you do not have any issue jumping pins 7 &

Great comments and questions! If previous experience is any indication, the blast cabinet will be used sporadically and extremely lightly by commercial standards, as I am a hobbyist that loves both

David, When I looked into that I found both kinds exist. I am not sure if they are designed to be one way or it is just an inherent feature of the regulator. Imran

Brian, Does the regulator serve as a one way valve and keep the smaller compressor from running for an extended period of time to fill up the tank on the large compressor? Thanks, Dave

Thanks Brian.

Right now I just plug in my small compressor to the airlines in the shop, past the tank and regulator for the big unit. I'm in the process of cleaning up the shop and organizing, so who knows what I

Brian, I forgot if you posted details before but reading the thread i have similar thoughts as Johnathon. Primary question is do you or anyone reading fill up the large tank with little compressor or

Stan, The HS950 is not pushed back per say, they are shipping them together to save shipping cost from Sacramento to me.? I assume that it may wait for a bit... PK @pkwoodworking

I created a hashtag too, #3D_Print, but the chances of folks remembering to add that to the subject are slim to none…. Brian Lamb blamb11@... www.lambtoolworks.com

Advantages are mostly noise and to a slight advantage in electricity costs. I use a Sil-Air 150-3 compressor, which is almost silent, then if my air requirement is more than it can supply, the 5hp

I have heard great things about those Eastwood compressors… maybe when my Ingersol unit finally bites the dust. Brian Lamb blamb11@... www.lambtoolworks.com

In my case, the small compressor is necessary to save amps. When running my pneumatic gates and some machines and dust collection, I don't need a hard starting 5 hp motor coming on at a bad time and