开云体育

Hi Mike: My Format-4 Finish 1102 is a two-head machine with one motor that runs both heads. In my case, the heads are mechanically engaged (no transmission) but have an electro-pneumatic system to

Hi Alex, Happy to help you spend your money. I spent some today but not for a new toy, my brake board on K975 went kaput :( Imran Sent: Monday, January 25, 2021 5:39 PM To: [email protected]

Since wide belts were mentioned, is it possible to get a multi roller (sanding station) version and run with only one thereby lowering the power draw? Having never seen one I am not clear if they use

Paul I remember know that the plate that slides in a groove I attached a piece of phonolic machined to proper thickness to bring flush with table. martin/campshure/co/llc mac campshure 7412 elmwood

Dave, I don't understand " I've had machinery max bid stuff back ". Are you saying that someone that won an item may not get it because Machinery Max didn't think it went for enough so they void the

Keeping watching. I've had machinery max bid stuff back and it shows up on the net auction. Dave ________________________________ Sent: Monday, January 25, 2021 5:39 PM To: [email protected]

Nice...and if they are saying the forklift will be a delayed load because they are using it for loadout you have to feel pretty confident that it works. Dave Davies

Hi Imran, That auction closed today. I picked up the 4x8 lift table, disc sander and forklift. Now just have to get them home during in what is shaping up to be really poor weather. The wide belt

I have a 2011 model year Quincy QT-54 single phase 5HP 220v vertical tank model running on a 20 amp circuit without issue. My use case driving the purchase was to run an automotive HVLP spray gun and

This may help answer your questions: https://flic.kr/s/aHskqy4ZAD David Best https://www.flickr.com/photos/davidpbest/albums https://www.instagram.com/davidpbest/

My 2009 KF700SP has separate start circuit relays for the saw and shaper. Sounds like the saw relay is bad. You can jumper the relay to test the rest. I am assuming the wiring is find unless the

The "new" Casadei machines are close enough to pick up. In particular the F25 tilting shaper currently at $4K. Anyone have experience with the brand and if it is worth pursuing even without a sliding

? Mike, This is made by RUWI and some folks here have this setup. I am not sure how long Felder has been selling it though. I would think it should work on your older slider but I will leave that

I understand this is a new item ( https://us.feldershop.com/en-US/en-US/en-US/en-US/Sawing/Accessories/Tensioning-and-clamping-devices/Clamping-and-saw-system-set.html) but would like to know if

Well, I just got word yesterday (yes a Sunday e-mail) that as my AD-941 was delivered on Friday, I will have to wait until June for my KF700SP and HS950. The wait is two months more that I thought.?

Hi Anthony, An auto drain my service you just fine. Mac martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Blast cabinets need a lot of air. How large are the motor and pump? I'd look for a good condition Quincy QR 325 if you need 15 cfm and 5 hp. They are slow running and quiet - for a piston pump -. Dave

Should I be looking at a 3-phase or single phase compressors for the 60-80 gallon size with use of a phase perfect? As suggested by Dave Kumm, I will be using a small pancake style compressor for most

Thanks Dave! This is all a new idea to me so trying to get my head around it. Very much appreciate the idea and the response. Anthony

FYI ...... Imran Begin forwarded message: From: "MachineryMax.Com" <sales@...> Date: January 25, 2021 at 10:51:00 AM EST To: imranindiana@... Subject: Auction closing today! Complete