开云体育

Hi Anthony, An auto drain my service you just fine. Mac martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Blast cabinets need a lot of air. How large are the motor and pump? I'd look for a good condition Quincy QR 325 if you need 15 cfm and 5 hp. They are slow running and quiet - for a piston pump -. Dave

Should I be looking at a 3-phase or single phase compressors for the 60-80 gallon size with use of a phase perfect? As suggested by Dave Kumm, I will be using a small pancake style compressor for most

Thanks Dave! This is all a new idea to me so trying to get my head around it. Very much appreciate the idea and the response. Anthony

FYI ...... Imran Begin forwarded message: From: "MachineryMax.Com" <sales@...> Date: January 25, 2021 at 10:51:00 AM EST To: imranindiana@... Subject: Auction closing today! Complete

That looks close to what I have. I haven't looked in a hundred years but that gets you there. I can run both compressors through the dryer but almost never bother with the small Jun Air. I only run

This topic has a long history indicated by the many search results. ?I have read many of the posts and gathered some great ideas. ?Unfortunately, I didn't save the info when browsing previously and

Thanks Jason. I do know someone and will check. I researched and it showed that you can get the markings by running the woodmizer on top of a smooth board but backwards. I tried that on my bandsaw but

Thanks David. I thought that might be the case based upon price of new. Imran

dunno know nuthing? 'bout the Laguna specifically. A start Cap? is out of the loop when the motor is? running.? You engaged it while holding the switch? in the start position then disengaged it

Imran, If you happen to know someone with a woodmizer, they make a blade sharpener that is quite efficient. My buddy just got one, I may have to try it out. Otherwise, we just recycle them. If you

Thanks for the original post and I'm glad your friend is on the mend. I've had some close calls messing with vertical runs of snap lock dust pipe. By design one is reaching out because of the ladder

I do not re-sharpen steel bandsaw blades. I do have my carbide one resharpened though. r/ David

Got back to finishing the project for my neighbor. Smelled burned wood right away on test cut with cypress. I could easily see the part where blade was cutting was black. Not sure if bandsaw ever

Pictures to follow, but this is an extra spindle that came off a pre 2007 CF741 machine, is 30mm bore and appears to be very clean, runs true. I bought the machine used from a Felder dealer who had

Thanks Matt. Bill Bélanger [email protected]> wrote:

It's part of an expanded set of mobility features on the Apple Watch. I could nerd out on this topic for pages but will spare you that. Fall detection is available on series 4 Apple Watch and later.

Hi there Ed, Apologies for the slow reply, I'm not very online and have never used these groups chat thing before. The castors have worked out really well actually, I used 6 because like you, I was

Thanks Matt. Great information. I look forward to the results of your Bluetooth switch experiments. I currently use a Wii Fi switch but am always searching for where I put it down last. Not an apple

Don’t know if this would work for you. https://www.clippard.com/part/PQS-EU08 Billy Click