开云体育

Jason, Thanks for sharing, what a sobering read that first post was!!! I hope Craig comes out of this okay, sounds like he's already on track to.

I don't honestly know if I'd want to trust my health to any of them. Android really wants to freeze background apps that you don't interact with so it can save power, and over time there's been a sort

The Suvamatic jointer guard is a wonderful add-on with its ability to "rise over" or "slide along", and I seriously considered it, but it protrudes 225 mm (~9 in) minimum and could protrude up to 550

I found 3.? The one below is $20 and rated somewhat higher than the free ones. https://play.google.com/store/apps/details?id=com.fall_detection -- Jerry P *Life is what happens to you when you're

There is really no point in measuring less than 30 hz and you don't need to slow the motor to the point where the fan isn't cooling the motor. There should be a function for current draw. My vfd is at

Does anyone know the name of the Android fall alert app? My search in Google Play Store twice yielded an old investment book by Benjamin Graham which must discuss stocks dropping, a whole nuther kind

Ok, I cut mine down and works great - they must make it to fit the 20” and use it on all of them. Will snap a pic when i get home Regards, Mark https://www.instagram.com/kessler_woodworks/

Thanks Dave. I caution I read with slowing motor (not designed for that purpose) is that fan slows with it. I think that really becomes an issue if speed is substantially reduced. Unfortunately, my

Slowing the motor reduces the amp draw so no issues with the motor. you can graph a system curve that way and see if increasing the Hz to 65 yields any additional cfm if your meter can stand it. You

David, Thanks for the idea. I can measure current draw but your response me think that maybe I can run the motor slower (since i run it with VFD) just for a short time to see if I can get the CFM in

Ahhh, I just took that back cover off my AD941. Yes, it's a cheap thing. If you find a flexible low cost option let me know. Dave Davies -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

Imran, can you measure the amp draw with all gates open and compare that to the cfm reading ? Then close various gates or partially and match the amp draw with the new cfm readings to get a rough fan

Thanks for the quick responses everyone! I also go t a call form Carl today!? Thanks Carl! The guard I was talking about was more accurately described as the cutter cover that mounts behind the

Does anyone have an idea how much CFM will be reduced when new filter gets dirty? I have few days to return the anemometer and don't have much planned work. I am curious what the collective thinks

I feel bad for the people with positional vertigo. Always there waiting , a wrong move and you are non functional. Dave ________________________________ Sent: Saturday, January 23, 2021 10:14 AM To:

OUCH? That's?? way more than I had

Wow, that's scary Mark. I wonder if something similar happened to my shop mate Craig. Given how we found him, with lumber both under him and on top of him, and his leg twisted up in the ladder. We

Tha ad941 standard guard is as shown below, is the guard you are talking about? When I bought mine last year I was actually looking at the ad741 which also comes with that guard so I added the

Congratulations. Great to hear a successful delivery story. I see that Felder has changed the guard design. I have the flip up arm design. Anyhow, they still show this on dual51 I am sure mine has two

Thank You for all the replies and helpful information. The problem ended up being on the hinge side was so hung up and would not adjust down even with the bolts loose. I ended up using a clamp and