开云体育

Good to know, David. Imran

It seems like i never throw anything away but the bearings are likely small and cheap. The rotor, end bell, and fan blades might be worth saving and I don't know if the stator and windings can be

Opps ... sorry should have restated that.? I am located in Twin Falls Idaho in south central Idaho mid-way between Salt Lake City and Boise.

It took me nearly 20 yrs to learn that I can stop the saw with shaper stop button ??? Imran

You still have other stop switches, at least on the models I am familiar with, along with the emergency stop. Imran

On mine, I have separate main blade and scorer. I can only start remotely either one but cannot stop from there. However, there are 3 stops available for me as I am processing. One is at the near end

Not an issue, the stop on the newer saws is 24v run via the rail, only the start is remote. This was implemented due to eu rules that require a stop where there is a start (or something like that) to

Annu, Glad you are up and running. If it was me, I would at least open the old motor to see if the short is outside the windings. Like damaged insulation of the connecting wires. You cannot damage

So I am to understand that the remote blade start switch that is located at the end of the slider (option from Felder) is wireless and battery operated?? If so, is that not a safety issue as what if

Glad that worked, extruded aluminum is usually not too brittle, so I hoped that they wouldn’t crack. Also happy to hear that you really like the parallel fences! Brian

Great to hear you are sorted, Annu Roger

the battery is under the cover on the end of the slider, underneath.??

Re: Slider Switches (groups.io) ( /g/felderownersgroup/message/101169?p=,,,20,0,0,0::Created,,remote+start+battery,20,2,0,70134636 ) -- Jerry P *Life is what happens to you when

i am speaking of the switch on the slider ...any hints to where the battery is??

Where are you located?

If you are speaking of switch on slider it’s most likely time to replace battery. Can’t help you more as I do not have it. Imran

Hey All, My hammer is now working. Brian, Thanks for your advice about bolting down the motor and seeing if it straightens out, that did the trick. ?BTW, your parallel arms my be my favorite

The remote start switch for the saw suddenly stopped working on the k700S making panels hard to cut because i can hardly reach? the start switch on the side that does work.? Any advice as to where

In long narrow spaces they give you flexibility with the smaller sliding tables I have had to fight the planning authority for every inch on my new workshop, so it would be nice to site the machine

I feel your frustration, Annu. I’m glad, though, that you confirmed the motor short as that eliminates any remaining doubt in that area and looks as if I was wrong in insisting that the brake module