开云体育

There is no mention of sanding between coats in the application instructions. Any recommendations? I am applying it to western red cedar. Imran

That switch may have come with jumpers installed to make it look like the original electrically. Without a wiring diagram for the original it will be difficult to determine with a multimeter as that

All, I am considering the cost/value proposition of investing in a shaper setup that has automated programmable setup capacities (or more?). I am curious what your recommendations may be for shopping

Mine is about 14 years old and I did have to put a new o-ring in the rotary union a couple years back…. which would have been simple if it wasn’t 16 foot off the ground. Brian Lamb blamb11@...

Martin slider is indeed phenomenal. The build quality is absolutely the best in the world. The parallelogram outrigger table is so nice and easy to use. James [email protected]> wrote:

That slamming is not for the faint of heart. I had to up my game several times and even made a phone call to felder to confirm the level of slamming ? Imran

You can view it with subtitles if you like. https://www.youtube.com/watch?v=m1Na_3tTZ2w&feature=emb_logo <https://www.youtube.com/watch?v=m1Na_3tTZ2w&feature=emb_logo> David Best

I agree with Brian. I have a 9 year old Reelcraft and it has never failed me!

James, They released a version of the video with English subtitles. I watched it at one point.

He’s forcing the bearing cage to center between the upper and lower sliding table ways. You have to do the same thing on a Felder X-Roll to get the bearing cage centered. You’d never know that

https://www.youtube.com/watch?v=EG9b7ofMdm8&ab_channel=Scott%2BSargeantWoodworkingMachineryLtd Martin factory tour. Wish there was at least english translation. I am a bit surprised that when

Ask Martin for quotes. Like Felder gear, it varies a lot depending on what options you configure with the machine. David Best https://www.flickr.com/photos/davidpbest/albums

What’s price for Martin ? Elegance Custom Cabinetry Minneapolis, Minnesota Regards Dmitry Ivanovs .

Bomb-proof is how I describe them. Much better build quality than a 590 - in my humble opinion. Sorry Felder. David Best https://www.flickr.com/photos/davidpbest/albums

The Martin T70 or T75 are both TOTAL BEASTS!!? On Sunday, January 3, 2021, 06:55:52 PM PST, david@... via groups.io <david@...> wrote: I recommend you put a Martin

I recommend you put a Martin T70 or T75 in the mix when evaluating an upgrade from the Kappa 400X. David Best https://www.flickr.com/photos/davidpbest/albums https://www.instagram.com/davidpbest/

Hi Dmitry: I’ve not seen the 590 in the flesh yet. If you really do upgrade, I would love a “real world” appraisal of the machine. It looks very nice on paper! Warm regards, Lucky

Hi Mac, Forgive me guys, but the below table ducting is 120mm on my machine. Let’s blame it on one too many cocktails during the holiday period. Sorry. The Kappa design, at least from years ago, has

Thanx again guys! I pulled the trigger tonight on the Strongway and the Tekton (the price came down to $180 for the 3/8 hose). We'll see what happens.... (hopefully nothing memorable).

Lucky can you increase the size at the casting with a transition? On my SCMI the dust is 6” I think and goes straight out the rear of the saw with a very short flex maybe 10” long.