开云体育

JP, So I have a KF700 with 2m slider and wanted a separate saw & shaper and a longer slider. So I went with K975, granted buying used was super cost effective. It would not matter a bit if I get my

I’m the same age, if you can afford the upgrade, do it and don’t look back. Life is too short to not enjoy what you are doing… I just lost a good friend and an ex-brother-in-law and they were

LOL, thanks Cliff ?

Hi guys I have a kappa 450 x motion with a few problems no1 the electric fence moves with the +and - buttons but If I use the keypad to type in a distance and then press start I get a fault code Coll

I shall? plague? you no? more with this. Thanks for the correction.

I bought a 2000 KF700S Professional in May, $6950, hobby use only, 3 shaper spindles, 3 phase, 3 motors,? body of the saw appears to be a clone of this one, in northern Wisconson.? (No overhead

After going back and forth on this, I'm again putting this for sale. This is for a fully loaded 2010 CF741SP with some special non-standard features that are no longer available on the newer models.

If you go the full boat the cost difference from k700 to k940 isn’t that much (at least in my case) of course then you need to add phase conversion that adds to and before you know it you’ve spent

I was thinking about the same to get DRO and longer slider, but my current thinking is skipping the K700 and go directly to K940 with a phase converter. I am a woodworking hobbyist too. Bill

It sold, but i couldnt tell what year it was. Also, what length was the slider? I will have to start another thread one day comparing some of the higher end brands of sliders. I know next to nothing

If I were in your position I will get what I really want and pay someone to commission the new saw .

I am a woodworking hobbyist of 35+ yrs, I have a 24’ x 24’ shop I built in my backyard 20 yrs ago. On 8/2019 I purchased new a K500 Pro model with 80” slider and added Mac’s super pneumatic

Facebook Marketplace has the worst search function in the history of the world. Dave ________________________________ Sent: Tuesday, December 15, 2020 12:12 PM To: [email protected]

Cliff, I have corrected myself many times here but looks like I have to pay my dues for the bad info I put out. I never said PP had choppy output, I was incorrectly concerned with a higher voltage. A

Amazing

Cliff, after a zillion exchanges on FOG and off, the author of the analysis you refer to acknowledged that it was in error. Jonathan, the smallest digital is:?https://www.phasetechnologies.com/pt007

I think it's still for sale... I just had a hard time finding the ad. =============== Brian Lamb blamb11@...<mailto:blamb11@...> Phoenix, AZ =============== ________________________________

Brian, Somebody got a real deal on that one.

Oh boy, here we go again... Regards, Mark https://www.instagram.com/kessler_woodworks/

Imran, It can be a huge amount of work blowing off the sawdust from a machine for a photo.? First you have to find the air chuck, turn on the compressor, then you might even have to untangle that air