开云体育

I bought one of the Quatron economy green line lasers and mounted it to a 9' ceiling over my saw. It makes a long bright green line right along the blade. Thank you to whoever started this thread for

Thanks everyone for the kind comments.? I have 2 more rockers in production, but they are the classic Maloof..1 is in Birdseye maple and the other is in a really cool figured walnut.? Both will be

Hi Randy, Very good idea to build a second rocker, as you will need this to sit on when admiring the awesome craftsmanship that you have put into first rocker, after awhile you can switch and admire

Wow Randy not only are you skilled but quick. It seems you just posted the last chair. Nice work. Philip Davidson

To totally missed the rip fence part... yea that one is real easy Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

I make a crosscut fence DRO but nothing for the rip fence. It’s honestly so easy, you stick the banding into the extrusion on the machine and make a little l bracket out of some angle aluminum and

Randy Very nice is it comfortable? Thanks for sharing Mac,,,l martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Randy, beautiful. really like the black tips on rockers. makes me think of gazelle’ hoof ready to take off. imran

David, Why am i not surprised that you are up on this. inspectors are a pain. that is one thing about living out of city, 20 yrs ago, only inspection i needed was septic. the storage room i am

That is a real beauty Randy. Congratulations! Bill Bélanger [email protected]> wrote:

I did a post a few months back on a copy of Sam Maloof's prototype rocker that he made before he passed.? After I finished that chair, a flood of idea's and changes came over me, so I started on a

Imran, We tried out the bare naked T-stud on a project a couple months ago, so I have some thoughts to share. Like me, my client’s background is in high tech, so he was eager to use this product

I looked at the same for a K500 and for the rip side Imran is correct. This video is the best I found and was referenced when I asked a few weeks ago. I got a quote for the part and it was around

i think it was a caption that said, price on par with high end option. so i assume, equal to engineered studs. last i checked engineered stud was about 75%-80% more than premium stud and about double

Great idea. These would be nice for running electrical, but maybe harder to run a hole saw through them for plumbing.? I also wonder about cost? All this new technology is great, but comes at a cost.

Forgot to mention Brian Lamb has a very nice DRO flip stop available if you go with the non DRO fence on the new saw and change your mind later Regards,

not aware of plug & play but there are DIY options. search noble artisan on utube. if you don’t find it let me know. i can post link when back home in couple of hrs. it has been shared here multiple

I would suggest factory, you can do after market for about $350 + you need a bracket. With factory you get a heavier fence. Don’t think the felder dro can be added at a later date without a lot of

Need some pictures please! Looking to get a KF700SP - Quoted and ready to put the deposit down.? Anybody have a nice aftermarket DRO setup on a newer Felder Rip fence? The factory option seems

Thanks, Imran! We just built a couple of years ago but had I known about these I would have looked seriously at using them. Good to know. Cheers Eric [email protected]> wrote: