开云体育

recently i ended up watching a bondic ad on utube. a uv cured liquid plastic. however looking at the small amount you get for $23, it appears to be geared towards small repairs. no personal experience

I'm? hankering to try? the UV cure epoxies.? However all I can find is cheesy looking stuff that looks like something Phil Swift would be hawking on TV. Any one using it? know anything about it?

that's pretty much how I make mine. I have a fixture into which I put a thicknessed and sized piece of lumber and? It guides me in the rountering

“I've needed the saw too much lately.” i never complain having this problem. imran

I don't know what that rig costs new, but I would guess something north of 40k. I think it is worth it.

Thanks for the info Skip! Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

It is sold for $15,151 x 1.15 = $17,423 I think the buyer is probably a Martin machine collector, not a woodworker. $17,423 for a 21 year old Martin shaper, does not make a lot of sense. James wrote:

I have to get it out first, maybe this weekend, I've needed the saw too much lately. [email protected]> wrote:

John, i like brake so much that i do not like working without. did you have your friend look at the board? cannot remember if you shared a pic of board in our private conversation. imran

Or you could have my problem where you push the stop button, the saw surges and keeps running full power for another 10 seconds before starting to stop, I still have to bypass the board Imran.

Thanks for the clarification, don’t know how I misunderstood this... “Scoring pretty well eliminates their use on the slider because of the table slider height difference” Regards, Mark

Thanks for the clarification, don’t know how I misunderstood this... “Scoring pretty well eliminates their use on the slider because of the table slider height difference” Regards, Mark

I didn't say that it doesn't work I said it not needed with scoring. I had a nice one like you are showing until it got blown to rat shit with a tapered cutoff. Now I use this when necessary. But as

in my case it was a blown up cap. however, it just disabled the brake and everything worked. there are many ways for brake board to cause problems. IIRC, another case reported here was where brake

John, Don’t understand your comment that a zci won’t work with scoring, maybe I am misunderstanding your comment but I have no issues with my 20min Prototype build of one, I also have no howling

I had a similar problem last week with my Hammer CF531P. ?After using the shaper with a huge rebate cutter, the break cried and ceased functioning. ?Next startup attempt tripped the breaker. I went

Felder must have changed their inserts from the fine ply phenolic. I've got 3 and never had an issue with them. Scoring pretty well eliminates their use on the slider because of the table slider

I dont pay much attention to Machinerymax, because they are almost always in California. I am in Pennsylvania, so theres a bit of distance there. However, i lust after a Martin T54. That might be a

Hey Steve I'm glad you figured out how to cut and extend the saw kerf...your way is a good solution. ?The reason I didn't cut saw kerfs to begin with is because...after talking with a Felder/Hammer

After the buyer's premium of 15% Martin shaper is $12,000. That doesn't seem like a good deal for a 1999 shaper. Dave [email protected]> wrote: -- Dave & Marie Davies www.myfinishingtouch.com