开云体育

Hi Will, Just to be sure, can you confirm that you are speaking of surface planner which most here on FOG will call Jointer. Yes, European terminology makes more sense but that is what we are stuck

Gerald don’t get me wrong I am a great fan of Felder and what you outline makes sense in sourcing from a single supplier if you are in the market for multiple machines. Purchasing ?multiple

John, I don’t think I documented the guard build. I probably put it together over a year or two. If you can get a hold of the saw guard, the rest of the set up is pretty simple to cobble together.

Delivery available within a reasonable distance from 06606.

Hi Willie, When I got my C3 31 the dealer couldn't commission it because the electrical lead was too short and couldn't reach my 16 amp socket! Na?vely, I thought that didn't really matter as it

740 is a great size. Large table and ability to resaw easily. There has been a used Felder ( ACM ) for sale recently. Dave ________________________________ Sent: Thursday, February 20, 2020 5:25 PM

Brian, Thanks for the great side-by-side comparison. I’m leaning on going with Felder. All of my other big machines will be Felder (also planning on ordering a K740, AD951 & F700Z, plus dust

The 600 is ACM's Star series which is lighter than their "40" series. Only relevant if resawing a lot. Dave ________________________________ Sent: Thursday, February 20, 2020 5:08 PM To: Gerald

I own a Felder FB510 and an ACM Star 600. I spent years trying to find a good used Italian Bandsaw and gave up and bought the FB510.new The FB510 is a great bandsaw - with a couple of minor

I ordered my C3 31 on 12/29/2019; received it on 1/24/2020.? I've been trying my level best to set it up and have not been able to get the *thicknessing* planer to stop kicking and/or sniping

Cross-licensing. “Give us your bandsaw designs and we’ll sell you sliding tables.” David Best

Interesting that the Summa appears to have the Xroll sliding table [image: image.png] Dave [email protected]> wrote:

FB saws are not sourced from ACM. The Felder 740 industrial line is ACM. Dave ________________________________ Sent: Thursday, February 20, 2020 3:35 PM To: Felder Owners Group

Someone recently made a comment that the Felder FBs were/are rebranded ACMs but not as good as the bandsaws directly from ACM. So now I’m looking at the BS 740 and even the Summa 740 2” but have

Humm, been a while since I took mechanics and am in software development now so go figure. Wouldn’t the definition below of strong be that it is strong and stiff and not just strong? Regards, Mark

In material science, generally: Stiff — resists deformation Strong — resists both deformation and failure But I suspect everyone knows what "strong" meant in the context of a bandsaw.

Hi Sang, Great, I am sure you will come up with a great plan.? Could using the ceiling as the support surface simplify the mounting issue?? I believe some have shown concepts that appear workable.

Oops, hit send... Strong would be more like how much it can bend before it will yield but stiffness is more like how much it will resist yielding/deformation to a load. Regards, Mark

I think it’s stiffness we are looking for here. Regards, Mark

Strong is easy, it's strong and cheap that's harder ;-) The crown on my FB610 wheel works out to about 7" radius.