开云体育

Hi Fred, I am attaching a PDF where I summarize my views on benchtop versus knee mills and what I bought or would buy today. Enjoy. If you have more specific questions, just let me know. David

That's a clever design. Thanks wrote:

Nice jig.? I'm thinking I'll go with Kreg hardware as you did.

After thinking it over, I decided to re-organize (and toss junk) in the garage to make more room so I can mount the outrigger table and just leave it in place.? This will make using a Fritz and Fran

Found this while googling Dave Davies https://www.bgrci-foerderpreis.de/foerderpreis/beitrag.aspx?nr=1765 [image: image.png] [image: image.png] [image: image.png] [email protected]> wrote: --

From the parts diagram, it appears to be the entire assembly including the support arms and hose.? i'm definitely interested.

Thanks Shawn and others for voicing their interest. I counted 4 including myself. Let me see where the conversation leads with the sales rep and will get back to this thread with updates. Glen - I

I’d definitely be interested in one also. I’m in the SF Bay Area. I looked at the Grizzly a while ago, but hadn’t heard of anyone using it on a Felder, and just didn’t pull the trigger. Glad

Are you sure 300.00 is not just the guard and does not include the support bracket. It seems cheap to me, maybe I'm just use to Felder pricing. I have the O/H guard on my saw and its big and well

Thanks for the drawing and the support looks possibly adequate, and for $300, mods would not be a big issue. I am definitely interested in a group buy.

In case someone wonder, the scale on a K500 with the thin crosscut fence is exactly 1/2 inch wide. Bill

Keep in mind that the Felder overhead arm is bolted to the saw chassis and looks heavier than this version. It also come with a second plastic cover for angled cuts. If you mod the intake, you have a

It seems to me that the first board passing through the new Tersa isn't as nice as those that follow. Might be just me but I change knives at beginning of project rather than for the final pass. I'm

? Hi Joe, I did go thru the procedure to see how it works and also to clean. I have no reason to flip knives but I am wondering if I should flip it for final runs or dedicate the old edge for rough

I talked to the Harvey guy in China ( Ben Chan ? ). I didn't pursue because the guard wasn't long enough to cover the blade and scorer. Harvey doesn't look to build the same machines since they got

My first F&F jig made of two scrap blocks of 6/4 poplar, about 5 x 10? inch with a maple bar at the bottom that was hand planed to the exact width of a Hammer K5 sliding table's T slot.? I still use

$300 plus shipping for that guard seems like a steal compared to the Felder guard. I like that it comes with both shrouds. I'm definitely interested

I reached out to Harvey too, but their response rate on Alibaba is not encouraging. OAV at least replied to me and sent me technical drawings. They did ask several times if I had one of their

It's $1,361.00 before tax and shipping from Felder -- a bit more than I would like to spend on the thing, especially if there's an alternative at 1/3rd the price. Getting into Felder isn't cheap, but

I have been looking at a Harvey Shark S-12 Guard, but the only way to buy is from China. It is also listed as a Axminster Trade S-12 overhead blade guard. It cost about $700.00. Does anyone know of a