开云体育

Michael, Let me refer you to the configurator for the KF700: http://www.felderusa.com/us-us/products/saw-shapers/sawshaper-new-kf-700-s-professional.html

Yes, check David Best's album https://www.flickr.com/photos/davidpbest/albums/72157671055139816 On the heavy crosscut fence, you could have 3 DRO. The standard one with the stop on the left, then the

Thanks for the clarifications David. You are correct I was planning on the mechanical scoring unit because I didn't want yet another motor to run on my limited power budget. Does anybody know what the

Michael, Let me clarify a few things. I assume you are considering mechanical scoring because of your off-the-grid power consumption limits. If you have the power for electronic scoring (it’s a

I didn't realize you could get a DRO on the fence. Do you mean a DRO on the stops on the crosscut fence, or a DRO on the table-saw style rip fence, or a DRO on Felder's slider rip fence? (There are a

Yes, the current single phase KF700 has separate scoring unit. James [felder-woodworking] <felder-woodworking@...> wrote:

Michael, I have 3 phase 7.5HP KF700SP with a 9 foot slider. Before I placed the order back in March, I also got advice from David Best. I took all the advice from David Best regarding the machine

My KF700S (circa 2013) has single phase motors. When I first replied to you I assumed that option was still available, but did not look at the current specifications to check. Sent: Saturday, December

My K700S has the separate motors and adjustment at any height but were only available with 3 phase, ?don't know if this has changed since 2010. Just on a side note, I always run my blades at full

I have a KF700S with (I guess) the precision miter system (it keeps the ruler on the fence reading accurately as you change angles—but only for the designated “standard” angles). I make a lot of

Wow, my manual has a trianglar "planer" fence (which I have) and a "tablesaw fence" (which I don't have). Are you all saying neither are good? Does that go for the current fences? Assuming they could

Michael, I have the separate scoring unit and it raises and lowers its own trunnion assembly very nicely. Stays aligned beautifully. It was worth the few bucks more. John ~ John ~ H&H Woodworking

Very informative, Dan. Thanks for posting. Now if we could just find a resident e. engineer to do the same on adapting a vfd to some US RL models... :)

So I'm working on finalizing my order for a KF700 S Pro with a 10 foot slider and the 1500mm outrigger. I've gotten some excellent advice from David Best. David noted that in his experience the

On my KF700SP I use the following. 300mm x 100T Tenryu 300mm x 48T Tenryu 300mm x 28T Tenryu 300mm x 100T Silent Power 300mm x 48T Silent Power 300mm x 28T Silent Power 250mm x 48T Silent Power (Much

I've had nothing but good results from the SilentPower line.

Dan, Very cool design. I assumed with the arduino it would be a simple matter of more i/o and you could do whatever you wanted. I have been kicking around a blast gate design and just had no real idea

Great job. I struggled with that whole remote start thing for my RL. Took a long look at the Penn State device and opened up my RL electrical panel and decided that I needed a less technical solution.

Hammer's fence sucks. Floppy, deflects like crazy, won't stand up to wear, seems like it was designed by an adolescent on bring your kid to work day. It's sad really because they put a lot of work

Thanks Brian. No current intent or plans to sell these, but never say never. With this approach, scaling to multiple ports and machines would be easy. While mine is set up for one input channel (saw)