开云体育

I have no idea about file format with 3D files. I'm new to 3D printing and I was hoping it would give me something I could start with but I'm sure it would have to be adjusted for my saw. Might be

Mathelo, I will get in touch with Matt tomorrow about the 3D file. You might have to tell me what format works for you. Also, the response may be a bit delayed, as he does not work daily. Ironically,

I'm interested in getting the file. I'd have to modify it for my BF6-41 but this is exactly what I was looking for.

Imran Malik -- Your adapter looks like it works well. It is similar to one I have been using for about a year. This is on a Hammer K3 that's at least 10yo. I always felt the single biggest dust

I have a BF6-41 with a Delta Uni-Fence that I installed many years ago. I'm generally happy with it. However, the rail that the fence rides on protrudes almost 26" past the jointer. This gives me a

WIth respect to the use of MDF and HDF in kitchen and bath cabinetry I am seeing damage below sinks, near dishwashers and near showers as it swells and pushes aside the veneer, and wondering how those

Brian Lam, I’m not on any fence when it comes to airtight clamps. Love these things! ??? Wade

Might need the parameters changed to enable that. Still as Imran says, you can tace the wiring back. It should be 24V, at least it is on all the VFD's I've worked with. Brian

John, On my VFD the panel buttons are locked when remote operation is selected. I remember that in order to switch between remote and panel operation, I have to reprogram. I would expect the OEM to

Brian, the buttons on the VFD panel do not seem to start or stop the operation of the motor. -- John Hinman Boise ID Kappa 450X and A941

Wade, I hope this is not off topic but I am answering your call for comments on use since you still feel on the fence about the decision. Yesterday I started in on a dozen japanese style timber

You can start and stop it using the front panel of the VFD. See if that works properly and it might tell you that your remote switch or the wiring is the culprit. Brian

The VFD is original to the lathe, and is in a cabinet under the bed of the lathe. I have never cleaned it. I’ll blow the cabinet with compressed air. It is pretty well protected from the fountain

Aaron is right, Ecaps do deteriorate over time. Another thing I should mention is dust. I am not sure about the proximity of the VFD to the lathe. Either way, VFD should be cleaned of dust regularly

It the VFD part of the original stock lathe??? Or was it an add-on modification??? If the VFD is 20-30 years old, it is entirely possible that the electrolytic capacitors in the VFD power supply

Hi John, I got plenty of ideas from the discussion. If nothing else learned appropriate terminology and some history. In the end, the simplicity of design will win. I like following the best and this

John, Does the VFD show any error codes? Is there a way for you to check the VFD with another motor or run the lathe motor with another source? Unfortunately you cannot measure the VFD output voltage

Might be stopping in between poles on the motor just enough to stall out. Try hand-shifting position a few degrees and compare notes, might also be able to give it a spin by hand and then hit VFD to

I have a Powermatic lathe with a VFD. Lately it has occasionally refused to turn when switched on. It is intermittent, but the issue is becoming more frequent. I will stop the machine to check

According to Becksvoort, they invented the circular saw blade, commercial washing machine, metal pen nibs, and the concept of selling seeds in paper envelopes. They were not as insular and frozen in