开云体育

I have a Powermatic 22-44 and will echo the comments of others.? It works but is definitely not a finish sander, it is slow and tends to load up quickly especially when sanding exotics or getting

I had the Jet oscillating sander and it worked well apart from the keyway which couples the motor to the drum shaft shearing. I would nt get one without the oscillation. I developed a new technique

I have not seen the Holzmann, but it looks substantially different from the Powermatic-type platform I have. Now, my sander (as well as the Powermatic) has been in production for at least 25 years in

As for used, EU has a very decent market. Not sure about voltage differences but I assume you can transport it from a neighboring country. I have stopped looking so no longer have links but you should

The smaller wide belts have been around for years... check out the used market? Brian Lambblamb11@...

Brian, I wish I could find the North state here and at the US price- the Jet or SuperMax are actually a bit over $4000 here

Thank you Jeff!

Mac, the KF is working great and your clamps are phenomenal! Are you done with the Gomad?

Than you Imran! Apparently the oscillating Jet is not available and they have no idea when it might be available

David, I will keep looking, but so far I have not been able to find a local distributor/dealer who might have something similar to yours. The closest I could find here is a belt sander under a

I'm also on the edge of making a change here. I have a supermax single drum, and I've been eyeballing the powermatic dual drum DDS25. You are leading me rethink this.... That said, I don't think

I have the Performax 22-44 and while it works well enough, if you can find one of the smaller widebelts, go that route. The drum sanders are slow, you can't take more than maybe .015 (.4mm) at a time

We have a 19-38 that does a fine job of cleaning up and preparing for final sand. ?It’s not a production machine, as it takes several ‘passes’ to achieve final thickness. ( Does a great job on

How many passes do you typically have to do to release things?

Hello everyone, I've seen enough interest and overlap in 3D printing here that I figured I'd post this. Selling my Formlabs Form 3 SLA printer. The machine has low hours and is in excellent shape. I?

Echoing John Hinham's votes here. Despite all the other sanding options, there's a place for the supermax 19-38....it's so good for calibration dimensioning parts, but I would never consider it

I have the Laguna/SuperMax 1938. I cannot compare it with the Jet, or with a wide-belt sander as I have not used either of those. I’ve been satisfied with my Laguna. I use it primarily for light

That open-side widebelt is what I have and it’s been great. It’s made in China, I have no idea how you’d buy it in Poland, but here in the USA, the same machine is sold under the North State

Mariusz Might consider this style not really sure how makes them, Powermatic 230-Volt 5 HP 1PH Open End Belt Sander 1791250 homedepot.com martin/campshure/co/llc mac campshure 7412 elmwood ave.

Mariusz, Hope all is swell with you and you have your new kf up and running. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@...