开云体育

Okay, things have changed. Mine has both scales. I would ask Felder to swap the telescoping part if machine comes with wrong scale. Imran Malik

Yes, the telescoping fence scale is permanent. It is not a replaceable scale because both metric and imperial are there. My saw is old, unless things have changed, it is an option so really not

on the telescope fence, the scale is glued to the fence and you adjust the fence itself.

Are you sure about glued scale? How would one align? I have KF700 and K975, neither with glued scale. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

i got the replacement scale and installing them was relatively easy.

Same experience for me, I ordered metric and got imperial. Felder shipped both replacement scales. Easy to install the rip fence scale, but the crosscut is a bit trickier as it is glued and is quite

I’d take the hand wheel now knowing what power drive is all about. I’m almost ready to sell off my Felder stuff. But I have a bad history with their equipment. Which just makes me lean further

I still thinks it is better than hand wheel, but for almost additional $2k, I would expect something more refined.

Yeah, it’s on my planer and drives me nuts there too. It’s not refined enough to be easy to dial in.

This comes up often. System is not w/o flaw. Give it a sharp tap. After practice, on occasion I get a 10 thou advance vs 5 thou. This on a Dual 51. Imran Malik

Bummer :/ Luckily for most operations on the table saw, I don’t need to set the hight to 0.1mm accuracy. I can’t imagine having this mechanism on machines like planer or shaper.

No it’s that bad and annoying for me. Won’t ever buy another one with power drive. Wade

Reporting back on the K2 powerdriver. It is really nice to be able to dial in the angle/height electronically, however I do have an issue with small height increments. Instead of raising the blade by

Jeff, I have received manuals from Felder for at least 2 used machines. I prefer a soft copy as it is accessible on my phone and computer. Manuals stay in a safe place but I do pull them out when

I bought it used so no salesperson. I did ask the tech I'd been emailing back and forth with, but it was towards the end of the day so not sure I'll hear anything back until next week. Sent: Friday,

Try Google Translate. It is amazing.

Imran Thanks for the tip, but unfortunately the C3 jointer tables are nothing like the A3-41. Appreciate the thought though. Sent: Friday, September 6, 2024 8:46 PM To: [email protected]

Sold, Thanks for the kind words! PK

Jeff, There is C3-31 (full combo) in the files section which may give you some idea. I suggest that you ask you Felder sales person to provide you with a copy. He/She will send you a link to download.