开云体育

I have three 3-phase Felder machines and they all came with 5 wire cords (no plug) with instructions that clearly stated on two of them that the “neutral leg (blue wire) is for European use only.”

Yesterday I did a blade change from my groove cutter to a saw blade. While the groove cutter was off I vacuumed out the cabinet. When I put the new blade and riving knife back on and closed the

One more suggestion. 3-Phase wiring is typically colored Black, Red, and Blue so you might ask your electrician to use those code-standard color choices, and wire up T1 to Black, T2 to Red, and T3 to

Thank you, David Best. Great info! -- John Hinman Boise ID K700S and A941

The PP will have connection terminals as follows: L1, L2 - these are the inputs to the PP and where you connect the 230VAC supply line from your breaker panel T1, T2, T3 - these are the output of the

Thanks, Imran! Jacques, Christmas will come in September. I am excited about the new saw. Once in a while I make impulse purchases, and this is one of the bigger ones. -- John Hinman Boise ID K700S

John, Apologies for distracting this thread, but I am curious to know how it feels to experiment ? Christmas in Summer ?? ? Congrats on the new equipment - I am sure you will enjoy it. Regards,

Hi John, With PP there is really not a high (voltage) on the manufactured leg as can be expected with Rotary Phase Converters. Even though the PP is super reliable it still does not hurt to avoid

Thanks, guys! I do not yet have the machine, so cannot look at the plug. I will tell the electrician I do not need a neutral. He has a question about a “high leg” that I cannot answer - hopefully

Felder 3-phase machines as sold in the USA do NOT require a neutral. David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best

John, You can take a look at the plug you have, it can be a good start, it you have 4 wires it defensively don't use natural. If you have 5 wires, it still not guarantee the natural is used at all.

Imran, The new PP units don't use natural wire as well. only 230V + ground.

In addition to what Imran wrote, Felder is generally an EU company, and the machines are expected to usually work with EU voltage. The voltage between a phase and the natural in EU is 230V. so if

FWIW my 2023 10kw Format4 profil z x-motion doesn't use a neutral. I'm not sure if the same motors and electronics are shared between their shapers and saws or not. [email protected]> wrote:

How do I confirm? The saw in question is a new Format4 KAPPA 450 X-motion. -- John Hinman Boise ID K700S and A941

I was curious about my old PP unit. The manual does not show a connection for the neutral. Not sure if same is true for the newer models. Neutral is not needed by the PP to produce 3 phase but it

It is a valid question. A 3 phase machine can have a 120V single phase load and for that neutral would be required. I am not aware of any Felder saws that require neutral. Imran Malik

I contacted an electrician to install my Phase Perfect, in preparation for a 5.5 KW 3-phase slider. He just asked me this question “Do you know if the table saw requires a neutral?” I have no

How about a box of 10 for $180 from Felder? Unless these are the wrong size… https://www.felder-group.com/en-us/shop/reversible-blades-sc579679/reversible-blade-width-12-mm-sp124298 Sent: Tuesday,

It is an odd size. When I bought replacements I tried my Leitz rep (Brisbane) and he could not source the cutters for any price. Felder had them in stock. Warm regards, Lucky