开云体育

Dave, Why did you go with the 2035 as opposed to the smaller 2025 or 2030? Which options did you get. Does it work well as a woodworking machine? I was impressed that the president of the company

Brian all send a few pics later this am, In short the bag is on the outside of the sleeve the sleeve fills and you pull the sleeve out of the bag . Mac,, martin/campshure/co/llc mac campshure 7412

That's a pretty generic question. Is there something specific you're trying to find out? I've got an RL160 which works great with my hobbyist usage. I generally only operate one machine at a time and

In my case, the sleeve goes inside the bag. Its height is close to the drum height, so even if the empty bag lifts it cannot move up much because the sleeve hit the lid/cover. The issue with my

If the bag is just floating inside that sleeve, how do you prevent the bag from being sucked up into the cyclone when you turn it on?

I went searching for the PDF - it wasn’t easy, so here is a direct link: Induction_motors_Issue3.pdf drive.google.com Tom, thanks for sharing. I have a BSEE, but power systems was my least favorite

I tried a homemade version of this that worked okay. I don’t use cyclone as my main dust collector so did not follow thru but I was going to try this product. This however is only available for

Mac and I have discussed this before. I believe he started with two plastic and lightweight drums. Then cut off the ends of the drums. What’s left is a plastic cylinder sleeve. Put the sleeve on

Hey Mac. I’m not sure if I follow your description. Would you mind sending some photos? That sounds very promising. [email protected]> wrote:

Tom, If you're ever back down through Shreveport I have the Solberga Se2035 if you wanted to take a look. Dave Davies -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

Haha! Never heard of Ellis! Kind regards, Brian D. Milidrag Cell 248.7 <(248)%20283-8118>65.8411 brian.milidrag@...

The next size up is where you should be starting looking, since you've mentioned power feeders IMO. Just to comfortably use a Woodmaster CT, or other carbide blade, which need more tension. I would

Never even heard of Sorberga until mentioned in this string, that’s why I love this group! Now I can’t decide between the Ellis or Sorberga! Tom Morris Wichita, KS

Brian,,, I cut the bottom off 2 - 60 gallon plastic drums, light to handle. I put the bag over the sleeve than put the covers on , no need to clamp. They sit on wheeled dolly drum . I put windows in

Currently I have a 3.5 HP cyclone dust collector. it is plumbed down to 2 55-gallon drums. For a while this has worked fine for me with a few small issues: - In order to ensure the bags don't

Perfect… Thanks Brian! Bill

Use your parallel fences… that’s an operation that they excel at. Pencil mark your two square sides so you don’t cut them, and then set the fence to cut the angle on the other two sides. Brian

Howdy guys, I am going to try to build this kitchen island for our house and it all looks quite straight forward, but... I am looking for some guidance on making the legs. I've made legs for a Queen

Use one of the shaper fences Mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Dan, I'm interested in zero clearance insert for my Felder K 700 S Sent from my iPad Pro (12.9 inch)