开云体育

Hi Nathan, It really depends on what kind of work you're performing. I'd separate the free-standing mortising units from the bolt-on mortising units, since the free-standing mortising units have a

If you are a tool enthusiast, you need both plus a multirouter. All 3 are a bit different. I'm not there is a fair comparison between our fd250 and our pantorouter other than maybe....pantorouter is

Ohh dear, The cat has been released from the bag...? how long will it take for the debate to begin. I am waiting for what is to come with some delicious popcorn over in the corner... PK

Just browsing around through magazines and online recently i was reading about the pantorouter shown here - https://www.pantorouter.com/ It got me thinking about my pending order i have with felder

Hi Phil, If you're exploring alternative cutter blocks, you could also look into whether there's a Tersa cutterblock available: https://tersaknives.com/pages/tersa-planer-head (

Hi Mike, What John said is correct for my M503. The long side of the sensor needs to be in line with the mag strip. Did your other sensor work in this orientation? Imran Malik

Is your read head across the magnetic strip, or is the long direction of the read head aligned with the strip? I don’t know if that makes a difference, but it seemed like the directions that came

Check the distance from the read head to the banding. No, it doesn’t make a difference stuck to aluminum vs. steel. The only thing the read head picks up is the magnetic field from the banding.

I installed an M503L on my bandsaw fence and ran into a problem. I keep getting E07, meaning failure of magnetic field detection, or it shows miniscule changes across large distances. The only

Thank you for your feedback. Does the Shelix give a high quality finish? Is anyone using another type of cutter head that they could recommend? Thanks Phil

Hey Just jumped on my PC as it's easier to get the next bit of info. My experience with shelix is positive in the way that they are very responsive to questions and updates on the production wait

Hey It's not only in Australia. They just don't want to sell it as an upgrade. I tried it several times (Belgium). In the end I bought mine through www.shelixheads.com. It only mentions the A3-31 but

This looks a lot like 401-136 since the belt grove is elevated. What would you consider selling it for?

Hi Philip, I came across there spiral heads once, but have no personal experience with them. Have it look or contact them if they don't have the head listed you need.

Could you get a member from a different country to get one and send to you ? Roger

In Australia Felder will not sell me a spiral cutter head for my C3-31. My only option is an aftermarket version. Can anyone make recommendations here? Thanks Philip

Thank you Jonathan

Yes, it is in the files section written by Mark Thomas:

I noticed these have been listed to woodweb with a contact phone number and link to a more complete auction catalog. I would check there. I bought a FAT 500 from them earlier this month.

Did I imagine it, or did someone post a good while ago, that they successfully retro fitted a spiral cutter head into a Hammer planner. I have a noise problem with my C3- 31 and I don't really want to