Re: Eccentric clamp alternatives?
On Thu, Dec 28, 2023 at 07:21 AM, William Henzel wrote:
A few months ago I purchased a Compass AH-3
Hi William, Just to confirm, is the T version compatible with the Xroll slot or did you have to adapt the bottom piece? Thanks, Bill
|
Re: Eccentric clamp alternatives?
I usually just lurk and learn, but An alternative to the Harvey clamp is from bridge city,?
I picked up a couple from lee valley a couple years ago and they work well on my k3 slider, just need to adapt them to fit the t track, I think I added a washer.?
Mark
|
Re: Eccentric clamp alternatives?
A few months ago I purchased a Compass AH-3 from Harvey $220 and it works great. I will not used the eccentric cam clamp again.?
On Wednesday, December 27, 2023 at 05:17:16 PM PST, Derek Cohen <derekcohen@...> wrote:
Chris, I purchased one from Just Tools (in Perth), but they have closed down in Oz. I searched on the Web and noted these ones on Ali Express.
Regards from Perth
Derek
|
Re: Felder K700S (and others) Wenge Zero Clearance Inserts
Dan,
Are you still making and selling the zero clearance inserts?
|
Re: Eccentric clamp alternatives?
Hi again Chris,?
Here is the one I purchased several years ago ...
$139 AUD at Beyond Tools.
Regards from Perth
Derek
|
Re: Eccentric clamp alternatives?
Thank you so much splinterboy!!! This is above and beyond! I really appreciate this. That's exactly what I needed. Now I understand everything. Thinking about laminating a slice of HDPE under the washer as sliding material. The idea of making 3 or 4 t-nuts is a fantastic idea.
Thanks again!!
|
Re: You get what you pay for. Cheap digital fence readout.
This is my solution. It clears the large kip lever.
Kindest regards
Jonathan Samways
Mike,
Could you provide pictures of your M503L??
Thx,
Wade On Dec 27, 2023, at 6:51 AM, Mike <mike@...> wrote:
?I installed the M503L on my rip fence without much trouble. Now, I'm looking at the KF700 outrigger and I don't see an elegant solution. Can someone share pictures of how they installed theirs?  
|
Re: Eccentric clamp alternatives?
|
Re: Cutting tenons on the spindle moulder / shaper on BF6
https://www.whitehill-tools.com/cutter-heads/combi-heads/125-x-55-mm-Felder-Hammer-Combi-w-M10-x-40-Bolt-Washer/
|
Re: Eccentric clamp alternatives?
Chris, I purchased one from Just Tools (in Perth), but they have closed down in Oz. I searched on the Web and noted these ones on Ali Express.
Regards from Perth
Derek
|
Re: Eccentric clamp alternatives?
What I'm really interested is the tnut and top oversized washer dimensions if any one has them. Does the tnut have an M20 thread and the top washer just a pass through? Or is the tnut and washer connected regardless of the M20 post? Any pictures would be appreciated. I can design my own clamp system. I should know that I haven't received my kf700 yet so can't measure the slider slot etc.
Thanks,
Chris.
|
Geez David...
Not much to add.? It is home and waiting for its spot in the new shop...? Thanks Kelly.
The concrete we had to remove to execute the shop is being poured on 1-2-24.? We should get the final immediately after and then it is on me.
PK
|
Paul, tell ¡®em about your Barth 500V score. ?
David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best
toggle quoted message
Show quoted text
On Dec 27, 2023, at 3:35?PM, PK <pk@...> wrote:
Dave,
Yes I did.? I was going to buy@ AWFS but I drug my feet for some reason and this was about 65% of that quote with the fees included...
I had to do it... ;-)
PK
|
Dave,
Yes I did.? I was going to buy@ AWFS but I drug my feet for some reason and this was about 65% of that quote with the fees included...
I had to do it... ;-)
PK
|
PK,
You settled for that unit, I hope you can manage getting by with it. ????
Wade
toggle quoted message
Show quoted text
On Dec 27, 2023, at 1:53?PM, PK <pk@...> wrote:
?Larry,
I have a Kundig Uniq coming.? Should be picked up any day to be shipped to me.
PK
|
On Wed, Dec 27, 2023 at 03:53 PM, PK wrote:
Kundig Uniq
PK, That should be very nice...please post pictures when you get it set in place. Larry
|
Re: Eccentric clamp alternatives?
I¡¯m not a big fan of that Felder clamp either. It¡¯s too big too heavy bulky and difficult to adjust. I used to have a Mini Max, and theirs was just right. I¡¯m going to find a different one to use. Actually thinking of hijacking a Mini Max clamp and finding a machinist to mill and drill a bar for me. Anyone already done this?
|
Did you buy it at the Machinery Max auction?? I was bidding on the WBS but I would have had to spend $3K more than if I had bought the same sander from them four months earlier. Dave Davies
On Wed, Dec 27, 2023 at 3:53?PM PK < pk@...> wrote: Larry,
I have a Kundig Uniq coming.? Should be picked up any day to be shipped to me.
PK
-- Dave & Marie Davies
318-219-7868
|
Larry,
I have a Kundig Uniq coming.? Should be picked up any day to be shipped to me.
PK
|
Re: Eccentric clamp alternatives?
For what it¡¯s worth. ?I am in Canada and FedEx offers brutal service. ?DHL has been excellent. ? UPS only fair .
toggle quoted message
Show quoted text
On Dec 27, 2023, at 2:46?PM, mac campshure via groups.io <mac512002@...> wrote:
? FYI I ?would never use usps international as the last time. They stole 700.00 from me .? They insured my package and charged for it then customs refused the package in Chicago saying ?I couldn¡¯t insure it for that amount!!!!!!! Trying to collect from United States Postal Service priority they said go to United States Postal Service to collect United States. Postal Service said. They do not support anything shipped with United States postal online shipping.? I took it to postal court and quess what ,, lost. .? So I than put a claim against visa debit and after 3 months WON .? They could fight the__________! I only use DHL for international. UPS is stellar in what they do . Anything over a grand gets white glove treatment. fed x never does what they say there going to do . Mac,,,
Designing and building for 50 years On Dec 27, 2023, at 12:22?PM, imranindiana <imranindiana@...> wrote:
? I had eccentric clamp on FD250. The part I disliked most was that, when unlocking, if the handle got away, it would travel all the way and eventually stop after hitting the material. Not sure if this happened because my clamp was old. If it happens on a new clamp, it is a shame because it dented soft woods like cypress and cedar.
Someone on FOG gave me the idea to flip the puck in the clamp. This swapped the clamping and unclamping motions - clamping with handle moving towards material and unclamping with handle moving towards the horizontal bar. This solved my problem.
On Dec 27, 2023, at 2:58 PM, Steve Hubbard <hubbardsg@...> wrote:
? My experience echoes that of Aaron. The eccentric clamp is heavy and awkward. There is a learning curve for achieving just the right depth setting, and it moves the workpiece forward. Perhaps there are situations that require the extra strength of the eccentric clamp, but for the work I do with 3/4 inch sheet goods and up to 8/4 hardwood, the Kreg type clamp is adequate and more convenient.
Steve On Dec 27, 2023, at 1:06?PM, Aaron Inami <ainami@...> wrote:
guys- Chris is in Australia. ?I don¡¯t know if you have ever done international shipping, but it is EXPENSIVE!! ? The Felder eccentric clamp is seriously heavy and big. ?It¡¯s likely going to cost you another $250 USD just to ship it uninsured to AUS! ? Likely not worth it, unless he really wants this clamp, lol.
Chris - those of us who have not gotten Mac¡¯s air clamps will generally use the following combination for Felder sliding table slots (with Australia seller links):
The Kreg bench clamp works great and is fast and easy. ? Just keep in mind that the Kreg clamp tends to pull the material back just a big when clamping down (like about 1mm). ? The 6¡± Kreg clamp will actually reach over the Felder crosscut fence, so you should clamp down that forward clamp first. ?It will pull the material against the fence. ?Then you can clamp down the rear clamp. ? Or make sure you hold down the material while clamping and you should be fine.
The Felder clamp, on the other hand, will tend to push the material forward when clamping, so it works great as a rear clamp, but not so much as a forward clamp (reaching over the crosscut fence).
-Aaron
|
PK
David P. Best
Larry
John Van Derwood