开云体育

Its seems to be very early for me this morning. You answered most of my questions in your question. I apologize. There is indeed a calibration procedure and David Best is the one I plan on doing

How were you cutting this material? Was this machine ever calibrated? Is this brand new, or did you purchase used and move it yo your current location?

Hi Daniel, What material you are cutting! Peter

Have you sighted your eye and compared against the column? I'm going to be hopefully doing experiments very soon regarding wheel depth in relation to chassis. To do this I have three plumbobs, and the

No auto drool scrubber. ?That was way too expensive. ? I would rather spend the money on wood and a Greene and Greene furniture making workshop so some day, I will hopefully be able to make a

I have occasionally considered getting a better bandsaw to replace my old Delta 14”, even though it has never failed to do what I want. If I bought an expensive saw and it worked like that I would

Joel, Did you get the auto drool scrubber option on those machines? Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612.432.2765

You mean this? Variable blade tracking angle - a design flaw flic.kr David Best - via mobile phone

Laguna saws manufactured by ACM have had this issue for years. I don’t think there is a fix. D Sent from my iEye

Hullo out there. I have a new N4400 bandsaw. The upper blade guide is misaligned and travels off vertical (deflecting the blade); the adjustment is very stiff; and tightening the locking knob deflects

I wonder if someone can advise me. My new K3 slider is giving me a 1mm bowed cut over 1800mm length. Is this normal? Is there a calibration procedure for this? Cheers --- Daniel Day Kitchener,

I had riving knife misalignment on my new K3 also, I double-side taped some pop can shims to the back of the mounting block. That way the riving knife just slides into position easily and no risk of

http://hotknives.com https://rangate.com/products/corrugated-knife-shaper-cutter Corrugated shaper cutter tooling from Rangate. ?Knives from the company "Hotknives" as shown yellow arrow in the

Joelgelman, Nice looking doors! What are “hot knives”? Thx, Wade

As an option to consider - Great Lakes. ?I wanted a custom profile for cope-stick cuts for rails and stiles for a kitchen project and other projects. ?I purchased the knives-backers so that I could

sure

Message sent. Please let me know if it hasn’t arrived as I’m new to the private message feature. :)

The corrugated option can be less fussy as the radial movement is locked in with the corrugations pretty accurately and you only have to worry about the up and down or axial positioning for your fit.

I use W. Moore Profiles for corrugated backed custom knives in my Schmidt cutterhead. I've had multiple profile/counter profile door sets made and they've always fit very well with no fussing. If you

Dan, it's good to have a variety of options if possible because you don't want to be forced away from a job for lack of suitable tooling.? For example, a friend had a bad puppy experience and needed