开云体育

I don't have old PP manual handy but I believe olders unit have the same fault codes, just more cryptic display. My 20 year old PP has a small plastic window about .5" x 1.5" through which you can see

Do not do this. This is a MOTOR STARTER.? It is not a phase converter, not a "power conditioner" or something. Similarly, a VFD is a MOTOR DRIVER, not a phase converter, etc.

I don't know what you think the issue is with a VFD on a PP.? I have run VFDs on my ~20 year old PP. The idea to put a VFD in front of a machine is generally not a good one.? A VFD (Variable

Hi Imran, ?Good advice, I will contact PP. ?It is an old unit 10+ yrs?, so Caps may be decayed, and probably a god idea to change out anyway. ?Best, Mike

Hi Mark, ?My PP is an early version, 10 HP with no display on the outside. ?Mike

Mark, thanks. ?That sounds promising. ?If one installs that in front of all the electronics in the KS700, will they operate? Or does one have to install that after the on switch for the motor?

Hi Mark, Thanks for sharing. That is a nice device and not too expensive. Also, it should work with all models of PP, whereas, per my understanding same is not true for VFD. It is almost worth adding

I assume PP displays "LOW INPUT VOLT" fault on its display?? It's nearly certain that?your generator voltage drops as it cannot handle the starting current.? You will be able to see this with a

Hi Michael, Brett has good advice. I would consult with PP to ensure that your model can handle a VFD at its output. I read here that “newer” PP models can do so. However first thing I would look

Thanks Brett, good idea to front end with a VFD. ?I'll look into that. Mike

I believe I looked into an application a while ago and inserting a vfd in front of the motor for programmed current limiting start was more cost effective if one didn't already have a Y/D starter box.

Hey Patrick, I agree with your comments. I’m not that proud of most of my projects. The rocking chair is a difficult project for someone with my skill level. I prefer the Maloof look, but I prefer

Yes, you'd need to do a lot of doors to justify that outlay IMO, especially when less expensive options can give such good results.? Here are a couple of blurry pics from a custom profile job.?

I used Hal Taylor’s design. I can recommend him without hesitation.

I have an interesting problem. ?Here in northern Ca, we're having lots of wild weather with associated power outages that last from a few minutes to the most current one which sas 3 days long. ?Lat

Beautiful Marty! Bill Pentz

They've made a lot of updates lately to their web page and haven't focused on the catalogue, so the latest one is 2019 but is still helpful for getting a sense of the overall range.? They have

Also that insert head is nice but a little too rich for my blood right now.. $1500 or more is a hard pill to swallow

Nice vid Brent. Does Whitehill have a catalog of different cutter profiles for cope and stick profiles? Most catalogs I’ve seen so far have have generic modeling profiles that don’t apply for my

Marty, Love it, great work!? I have made 3 Maloof style rockers over the years for family, and very recently attempted/started a a rocker cradle for my 3 week old, now it has turned into grand kid