开云体育

Hullo Peter & H; thank you for your response. This is a brand new K3 Winner machine (or was last July), helpfully unpacked by Felder in my shop. "No calibration required". I cut 2" ash, 1" hard maple,

Precisely. A bad Covid sight-unseen purchase based on reputation. I've used a half dozen vintage bandsaws over the years and not encountered this. -- Daniel Day Kitchener, Ontario, Canada

Exactly. I disassembled the thing this morning- it looks like a very simple mechanism, there is a bottom guide for the geared shaft, and at the top end, a small plate with an oversize hole; the clamp

Joel, Surely Darryl Peart is teaching a class nearby. That is a beautiful vanity? Thanks Jason Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612.432.2765

Good looking machines, I see what you mean with the extensions. In my case I am setup with horseshoe layout using strut down the center for electrical and duct,? Parallel configuration would be great

Pretty damn sexy, I had my ema and polish jointer set up like that, not martins but nice layout . You have the tools to make the green and green so nothing holding you back !! Congrats !! Mac,,

martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing and building for 50

Its seems to be very early for me this morning. You answered most of my questions in your question. I apologize. There is indeed a calibration procedure and David Best is the one I plan on doing

How were you cutting this material? Was this machine ever calibrated? Is this brand new, or did you purchase used and move it yo your current location?

Hi Daniel, What material you are cutting! Peter

Have you sighted your eye and compared against the column? I'm going to be hopefully doing experiments very soon regarding wheel depth in relation to chassis. To do this I have three plumbobs, and the

No auto drool scrubber. ?That was way too expensive. ? I would rather spend the money on wood and a Greene and Greene furniture making workshop so some day, I will hopefully be able to make a

I have occasionally considered getting a better bandsaw to replace my old Delta 14”, even though it has never failed to do what I want. If I bought an expensive saw and it worked like that I would

Joel, Did you get the auto drool scrubber option on those machines? Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612.432.2765

You mean this? Variable blade tracking angle - a design flaw flic.kr David Best - via mobile phone

Laguna saws manufactured by ACM have had this issue for years. I don’t think there is a fix. D Sent from my iEye

Hullo out there. I have a new N4400 bandsaw. The upper blade guide is misaligned and travels off vertical (deflecting the blade); the adjustment is very stiff; and tightening the locking knob deflects

I wonder if someone can advise me. My new K3 slider is giving me a 1mm bowed cut over 1800mm length. Is this normal? Is there a calibration procedure for this? Cheers --- Daniel Day Kitchener,

I had riving knife misalignment on my new K3 also, I double-side taped some pop can shims to the back of the mounting block. That way the riving knife just slides into position easily and no risk of

http://hotknives.com https://rangate.com/products/corrugated-knife-shaper-cutter Corrugated shaper cutter tooling from Rangate. ?Knives from the company "Hotknives" as shown yellow arrow in the