开云体育

Lovely work Mike, and thank you for sharing your father's story. -- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN

Mike, Thanks for the explanation.

Superb work, and a credit to his memory. Allen

The cabinets are beautiful. He must have been a special person. I hope he felt thanked for his service. Thank you for sharing. eduardo

I ran, it’s an artifact of the mechanism of making the mouldings. I glued up the long stripes and the short stripes separately. I then glued up flag blanks approximately 55mm deep, then glued a

Hi Mike, A great way to honor your Dad and we are grateful for his service. Good job on design and execution. The flags in opposing directions on the 2 cabinets caught my attention. Obviously,

What a great way to honor his service. Beautiful work, I am sure he would approve. Mark Foster

My father passed away last year on May 3rd at the age of 93. One of the events most affecting his life was his service in the Korean War. When my sister assembled his uniform jersey to display at his

I would look used for a refrigerated air dryer, worst case, you can get new from Harbor Freight for $500…. If you get a 20% discount it’s even

Hi, I am using a 3.5HP Quincy Air compressor w/60 gallon tank in my home shop and looking at air treatment options. The compressor is primarily used for the CNC tool changer which has its own

Here is my solution using the Harvey overarm blade guard on a K3 Winner. I attached the bottom of the support leg to the base’s bottom return flange and the upper portion is attached to the sheet

Don't get sucked into the sales hype. 5-hp is 5-hp. *Horse Power = flow x pressure x factor*. A vacuum pump (blower) with high pressure capacity will have low flow capacity.? Flow is required to

SirRey, I used to use a MiniGorilla with ~12' of 5" flex hose with my KF700 and A3-41 (and other machines). Rated at 580 cfm @ 2" SP, the Mini Gorilla kept up but only just barely. Also, I regularly

Steve, I used extensive runs of 4” hand duct with my Supercell; Oneida sells packages of it with the Supercell specifically in mind. Anywhere you do use flex you need to use their extra-stiff 4”

What's your ceiling height limit, and are you okay with a 35 gallon drum?? I have both a K3 and an A3-31 but I run an Oneida V-3000 with 35 gallon drum in my basement shop with a fairly low ceiling

Anyone out there using a Oneida Supercell with a Hammer K3 Winner or A3-31 or felder saws / joiner planers? Just curious how the performance is? Looking for something for my Garage as I use to have a

If you don't make a lot of dust on a regular basis, a much cheaper alternative to the supercell with very similar capabilities is the CamVac 386-6.?I found the camvac to do an excellent job at

B - This is really encouraging! ?A photo would be great! ?Part of my thinking also is that if, down the road, I end up in a space large enough I can always go bigger. ?I think I would likely be

I’ve had a supercell and a3-31 in a hobby shop with a 35 gallon drum. It loses a small amount of chips and dust from a planer and small/moderate amount from an 18bx laguna band saw on resawing but

I have a V5000 that Oneida recommended because I live at 5400 ft.? Throughput has never been a problem. "I have a 35-gallon drum on my current Oneida, and wish I had a bigger one. My thicknesser