开云体育

Having just completed my own duct work, I’ll second the saw envy. I used a cut-off saw which was more time consuming than a grinder because the pipe wouldn’t fit under the blade, but I think I

Pictures might help with some suggestions. I’m not familiar with the Hammer jointer fence. Brian Lamb blamb11@... www.lambtoolworks.com

I just got me new machine in and am setting it up. The jointer fence sets unlevel, with the infeed end of the fence touching the table, and the outfeed end being roughly 3/8" high off the table. I set

Thanks for the suggestions, looks like that was the missing piece .

I also recommend versaflo. Have had mine for 3 years now. Best overall respirator solution I’ve ever had, which is about all of them. Very good when at the lathe with the face shield

I also run a PAPR mask. The Sundtrom 500 specifically with the soft hood. I really like it and would never go back to a half or full face respirator.

+1 for the 3M Versaflo. It's actually something I don't mind wearing, despite the size. It's very comfortable on the head, well balanced, and not too heavy. I have some substantial wood dust allergies

They definitely value engineered that 850. I am no expert by a long shot on wide belts but based on observation from the video looks lightweight and they simplified things like where the head is fixed

Goody. No worries. Agreed, maybe the machine is a new animal. I look forward to hearing more about the FW850! Lucky From: [email protected] <[email protected]> on behalf of PK

Lucky, I read your review/challenges when I first started on the FOG.? You were super detailed and had amazing insights. It is what makes me want to know more about the differences in this new

Hi PK: If you have not read my detailed assessment of the FW950 classic, do yourself a favour and see if you can find it in the archives here. There is extensive misinformation in the USA and in

No news in anything he said, but regarding this: No, because a table saw is not a "dedicated motor circuit".? ? In the real world, an inspector may allow the argument that a "dedicated single-motor

Did anyone happen to see the news about a new, small widebelt sander from Felder? https://youtu.be/d1L9USMvcB4

The Felder tech had no issue with the electrical supply, and suggested I not change anything unless I experienced a problem with the breaker tripping. I had a good visit with my electrician today. I

Hi Dan! It's possible that might be for the outrigger support arm to prevent it from overextending. -- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN

Maybe for the outrigger support so it doesn’t come flying off… Regards, Mark https://www.instagram.com/kessler_woodworks/

Hi all, I’ve had my K700s setup for a couple weeks now and can’t figure out what this extra bolt with two nuts is for. It came in the packaging bag for the sliding table push button handle.

That’s nice! Easier than me with a cutting wheel in my grinder on my spiral duct. Brian Lamb blamb11@... www.lambtoolworks.com

There are many options for inhalation - just get the one that fits best. For me, the 3M cartridge type half mask works well. (Used them for years in an operating nuclear plant)! We also had full face

The 3M Versaflo is amazing. We purchased it for my wife’s work in spring 2020 for obvious reasons. After she received her vaccination, I bought the versaflo off her for my time in the shop. One,