开云体育

Hi Imran, I use the Felder bracket with gas strut (430-017).? The top surface is a little bit to small so I used a 3/8 steel plate as an adapter plate to bolt the bottom of the smart stand to.? The

Very nice looking drill press and cabinet. Steve

Which track and stop system is that, Bruce? -- John Hinman Boise ID Not a Felder Owner yet - expecting K700S in February and A941 in April 2022

I agree with you, Mark! As a hobby woodworker tools are toys. For me it is all about the experience, not about the product. A thread about unused tools would be great if I could be absolutely sure my

Here's my first attempt, pretty basic but works fine for now. -Bruce

Bill, I too have the Woodpecker table and really like the dust collection through the fence. I had the magnetic base light on my old drill press and moved it to the Nova and replaced the old bulb with

On the left edge is a place to hook a 2 1/2 inch vacuum cleaner but I have to make an adapter for the Festool vacuum. Bill

That is a cool table! -- John Hinman Boise ID Not a Felder Owner yet - expecting K700S in February and A941 in April 2022

The nova allows you to set speeds for any drill type and size and for any material very quickly. With my other drill presses I never bothered to change the speed because it was too inconvenient to

John, Not a bad plan. I think things like this come down to two things: The kind of work do you do and what you like to have for tools tor in my case toys. I almost never make any sort of production

This has been a really helpful thread! Lots of ideas posted. I will probably make something really basic first, whenever my saw actually gets here, and then think about something more elaborate. I get

By the way, the table on the Nova is larger than on many other drill presses. The table is never big enough! -- John Hinman Boise ID Not a Felder Owner yet - expecting K700S in February and A941 in

I have the Nova. The speed menu is convenient. It does not come with a light, which I found to be a problem. I tried a few different add-on lights, but nothing can position right where it is needed

Jared, I bought this a couple yrs ago from a used machinery dealer about 3 hours from me. I really like it, best 2K I have spend on tooling. The flexibility it give for drilling odd angles and

Chris, I think David was just asking for pictures to see your setup, i am curious as well. I use the flip stops all the time and they don’t get in the way and I want the reference to be on the left

I Have the Nova and had the same concerns with the electronics, not a fan of all the settings, I just use on/off and adjust speed via the knob. I also don’t like the soft buttons on the controls but

I’ve owned the Nova Voyager DVR drill press for 4 yrs and have been extremely pleased with it. It replaced a low end Delta drill press that I used for 25 yrs. I really like having no belts on the

No sweat, I was interested in learning about it. Imran

> > I was considering one of the nova offerings but am pretty unsure about. > Seems cheap for all the electronics it has. Wondering if anyone has one?

Thanks Imran. That’s very kind of you to send the link. Warm regards, Lucky