Awesome. Works not only for you two but also for the neighbors ?
Imran
toggle quoted message
Show quoted text
On Jun 3, 2021, at 10:35 PM, Bill Belanger <Bill@...> wrote: ? Thanks Imran, We¡¯re only here in winters so its not that big of ?a sacrifice. I wanted a place with a big workshop, she wanted a house in a gated community, so we compromised¡.
Bill B¨¦langer
On Thu, Jun 3, 2021 at 18:52 imranindiana via <imranindiana= [email protected]> wrote: Very nicely equipped shop. Envious that you have room for 3 benches. Good to hear what works well.
Very cooperative Mrs. to let go of all 3 garage spaces. David Kumm creates balance with diamonds, what¡¯s your trick ?
Imran On Jun 3, 2021, at 2:47 PM, Bill B¨¦langer < Bllblngr@...> wrote: ?Watching other interesting shops, and thought I'd make a video of mine!
Bill B¨¦langer
|
Bill so you have another shop at your summer home? Wait, it is summer, you're in the wrong shop. Glen
Alpine Moulding and Millwork Inc.
Mail: ?? P.O. Box 486
?????????? Murphys , CA. 95247 Shop: 441 Pennsylvania Gulch Road ????????? Murphys, CA. 95247
????????? 209-540-7501
LIC # 707507
On Thu, Jun 3, 2021 at 7:35 PM Bill Belanger < Bill@...> wrote: Thanks Imran, We¡¯re only here in winters so its not that big of ?a sacrifice. I wanted a place with a big workshop, she wanted a house in a gated community, so we compromised¡.
Bill B¨¦langer
On Thu, Jun 3, 2021 at 18:52 imranindiana via <imranindiana= [email protected]> wrote: Very nicely equipped shop. Envious that you have room for 3 benches. Good to hear what works well.
Very cooperative Mrs. to let go of all 3 garage spaces. David Kumm creates balance with diamonds, what¡¯s your trick ?
Imran On Jun 3, 2021, at 2:47 PM, Bill B¨¦langer < Bllblngr@...> wrote: ?Watching other interesting shops, and thought I'd make a video of mine!
Bill B¨¦langer
|
Thanks Imran, We¡¯re only here in winters so its not that big of ?a sacrifice. I wanted a place with a big workshop, she wanted a house in a gated community, so we compromised¡.
Bill B¨¦langer
On Thu, Jun 3, 2021 at 18:52 imranindiana via <imranindiana= [email protected]> wrote: Very nicely equipped shop. Envious that you have room for 3 benches. Good to hear what works well.
Very cooperative Mrs. to let go of all 3 garage spaces. David Kumm creates balance with diamonds, what¡¯s your trick ?
Imran On Jun 3, 2021, at 2:47 PM, Bill B¨¦langer < Bllblngr@...> wrote: ?Watching other interesting shops, and thought I'd make a video of mine!
Bill B¨¦langer
|
Very nice Bill Someday I will do mine . i need to get one of you guys over here to teach me cleanliness and organization. Glen
Alpine Moulding and Millwork Inc.
Mail: ?? P.O. Box 486
?????????? Murphys , CA. 95247 Shop: 441 Pennsylvania Gulch Road ????????? Murphys, CA. 95247
????????? 209-540-7501
LIC # 707507
On Thu, Jun 3, 2021 at 11:47 AM Bill B¨¦langer < Bllblngr@...> wrote: Watching other interesting shops, and thought I'd make a video of mine!
Bill B¨¦langer
|
No leaks, double checked. When planing a 16¡± board .025¡± per pass is about all I can do. ?Maybe I¡¯m just expecting to much?
|
Re: Door tooling and jigs
Thank you Lance
The pc 59381 is in fact what I had and it sounds like the 126 may have been what I had. Thank you for the help and the lnk to Templaco. I do not remember having to flip the PC hinge template. I remember it was pinned to the door and the jamb at the same time and you routed both together.
I will keep my eyes open for the 126, it was a great bevel planer
Glen
Alpine Moulding and Millwork Inc.
Mail: ?? P.O. Box 486
?????????? Murphys , CA. 95247 Shop: 441 Pennsylvania Gulch Road ????????? Murphys, CA. 95247
????????? 209-540-7501
LIC # 707507
PC Hinge jig-click see all buying options at right
The Bosche hinge jigs are my preference. I've had both. More accurate than the PC, as the jig doesn't happen to be flipped upside down to move from door to jamb. Originally sold as Stanley, they're the same jigs. Unfortunately, they are no longer manufactured.
Templaco Bore master kits (best made) and other templates/tools???
If doing a bunch of the same doors, Templaco will make custom hinge jigs:?
If there are good door and jamb suppliers anywhere nearby, see what they have for fixed hinge jigs.
The Porter Cable 126 Porta Plane, with spiral carbide blades is the best door planer by miles. Also, no longer available, but now that most door people just use pre-hung and split jamb doors, with patience they can be found used..
Happy hunting,
Lance
?Hi all I am looking for the following tooling that I had as a kid and made the stupid mistake of selling back in the day.
i do believe they are long out of production but maybe some of you might have one laying around you want to sell or can give a recommendation on something equal or better.
This is what i had, dont have part #"s
Porter cable door boring jig, it did 2-3/8, 2-3/4, Dills of 1-5/8 and 2-1/4"? it was a great set and easy to use.
Porter cable Hinge routing template set, it was 4 templates adjustable 3.5 4.0 4.5 and i believe 5"? It had bars to hook it all together and i could do 6/8 7/0 & 8/0 doors easy.
and last
Porter cable bevel planer, it was good and I really can do this on my machines, I would buy it anyway for specific tasks.
I guess the local door shop is not doing well and I am getting a lot of requests hang doors, luckily I know this well as I owned a door shop for 10 years?
i am looking to get the basics and see how this goes before I break down and get a Norfield Magnum.
If you have any of these you want to unload, I am interested, Or if you
know of better stuff, I would would like to hear.
Thanks in advance
Glen
Never thought I was going down this path again.
|
I put one in my? a3 31?? It was really quite straight forward.?
Nothing complicated at all . I did take pictures just in case?
didn't need 'em.
On 6/3/21 4:18 PM, John Terdik wrote:
toggle quoted message
Show quoted text
Mike, did you complete the upgrade? If so any comments or
suggestions would be appreciated. I do have a copy of the "Hammer
C3-31 planer head removal notes" and started to review and make
some notes. I could be wrong but it seems that the C3-31 and A3-31
are very much different. Because of this I stopped for now and
will wait for the head to arrive. I don't want to take my A3-31
out of service waiting for the Byrd head to arrive.
As others have done, I've searched the internet and have not found
anything specific for the A3-31.
I recently ordered (05/28/21) the head, bearings, extra screws and
extra cutters from?expect to receive it by the
end of this month (June). The delay is normal because Byrd does
not stock any cutterheads and the heads are made to order in
small batches or individually.
|
Very nicely equipped shop. Envious that you have room for 3 benches. Good to hear what works well.
Very cooperative Mrs. to let go of all 3 garage spaces. David Kumm creates balance with diamonds, what¡¯s your trick ?
Imran
toggle quoted message
Show quoted text
On Jun 3, 2021, at 2:47 PM, Bill B¨¦langer <Bllblngr@...> wrote: ?Watching other interesting shops, and thought I'd make a video of mine!
Bill B¨¦langer
|
I have the same Clearvue connected to my Dual 51. ?It handles the chip load fine without an airlock. ?I would check your cyclone, barrel, and filter assembly for leaks. ?For instance, if you have a leak in your barrel/lid this would inhibit the chips from falling out of the cyclone as they should. ?
/david
|
Good ones Albert and David ?
I may hve?to spend a week cleaning my shed and THEN present it as the opposite of your clean ones Bob
|
Thanks Michael! I am in New Zealand :)?
|
Thanks Lucky! It¡¯s only clean because I had to do a video, last time it¡¯s this clean was 3 years ago! I am always busy with production hence little time to organise the shop...?
|
Mike, did you complete the upgrade? If so any comments or suggestions would be appreciated. I do have a copy of the "Hammer C3-31 planer head removal notes" and started to review and make some notes. I could be wrong but it seems that the C3-31 and A3-31 are very much different. Because of this I stopped for now and will wait for the head to arrive. I don't want to take my A3-31 out of service waiting for the Byrd head to arrive.
As others have done, I've searched the internet and have not found anything specific for the A3-31.
I recently ordered (05/28/21) the head, bearings, extra screws and extra cutters from?expect to receive it by the end of this month (June). The delay is normal because Byrd does not stock any cutterheads and the heads are made to order in small batches or individually.
|
Watching other interesting shops, and thought I'd make a video of mine!
Bill B¨¦langer
|
Thanks much for posting the shop tour...hats off to you for the organization and thought that went into the design and layout!
|
 -- nice work David, ? I only wish I had your organizational skills. I¡¯m in this space all the time looking for something. ? Philip davidsonukuleles.com
|
According to a service technician, if you leave the rollers engaged for several weeks/months the pressure of the belt can deform one of the fly wheels (not sure exactly what it¡¯s called), and in result you will develop a flat spot and it will make a thump sound when you run the machine. I¡¯m guessing this is the same as when a band saw is left tensioned for an ¡°extended¡± amount of time.
|
Thanks for sharing Albert.
The new machine looks like right at home there.
Are you in Oz??
Cheers
Michael?
|
David,
I sanded the floors of my small 100m2 house with proper floor sanding machines and that was a nightmare. So my hat well and truly goes of to you and your Bosch! How's the back pulling up?!
Michael?
|
Hi Albert:
Very cool! Thanks for sharing. You¡¯ve got a beautiful shop there. Nicely laid out with moving around room. I always secretly chuckle to myself that David B. calls his Northfield sander a ¡°wide belt sander¡± ¡ nice to see a real wide-belt. (And now David is secretly saying ¡°f#3k you very much Lucky!¡± LOL)
Your shop looks nice and clean too. If only my shop looked that good!
Lucky
toggle quoted message
Show quoted text
[Edited Message Follows]
Taken 31st May Whats not in the video: 100 sqft Spray booth 100 sqft timber storage 10hp compressor and its shed. 100 sqft clamping room shop is 9m x 6 m (27ft x 18ft). about 580 sqft all started with a $100 Mitre saw 10 years ago
|
imran
Bill Belanger
Albert Lee
David Luckensmeyer