This video and photos, not woodworking, were all taken with my iPhone10
This was using my Hammer F3 Shaper, for the first time, all recorder on my iPhone10.
Chris Edwards (407) 902-1358 cell
toggle quoted message
Show quoted text
I create various YouTube videos, not for any advertising or commercial reasons.?
I have multiple versions of GoPros, ?Nikon DLSR that does video, but for the last couple of years all I¡¯ve used is my iPhone.?
Quality of video and audio is very good and it¡¯s easy to mount a lightweight iPhone on a regular floor standing tripod, a desktop tripod or a boom arm.? On Mar 3, 2021, at 8:32 PM, Fred Rossi <fred@...> wrote:
?Folks:
Do any of you create video in your shop for social media content, sales purposes, your web site etc.? If so, what type of camera do you use (or do you simply use a smart phone)? GoPro, Sony, other? I appreciate any bits of advice.
Fred Rossi
|
I create various YouTube videos, not for any advertising or commercial reasons.?
I have multiple versions of GoPros, ?Nikon DLSR that does video, but for the last couple of years all I¡¯ve used is my iPhone.?
Quality of video and audio is very good and it¡¯s easy to mount a lightweight iPhone on a regular floor standing tripod, a desktop tripod or a boom arm.?
toggle quoted message
Show quoted text
On Mar 3, 2021, at 8:32 PM, Fred Rossi <fred@...> wrote:
?Folks:
Do any of you create video in your shop for social media content, sales purposes, your web site etc.? If so, what type of camera do you use (or do you simply use a smart phone)? GoPro, Sony, other? I appreciate any bits of advice.
Fred Rossi
www.StudioRossi.us
|
Folks:
Do any of you create video in your shop for social media content, sales purposes, your web site etc.? If so, what type of camera do you use (or do you simply use a smart phone)? GoPro, Sony, other? I appreciate any bits of advice.
Fred Rossi
www.StudioRossi.us
|
Re: Northfield 32" Bandsaw
I thought I saw it before but I only notice it because of you so it doesn't make long term memory..? There was another Kundig but it looked tough so I didn't pay attention.? They only come up a few times a year and 37" are even more rare.? Dave
toggle quoted message
Show quoted text
Pics of that machine have been on various sites for a long time.? Went to the dealers site and they have the same two pics of the machine in a barn and now two pics of
a Kundig under power.? Not sure if the same machine.? I think it¡¯s been on Exfactory, Ebay, and now woodweb.
?
?
Machinery Exchange at woodweb.com
I did not see the Kundig, what is WW?
?
?
Good to hear.? I have an Oliver 116 that i should sell and figured 3000-3500 so that is close.? Did you see the Kundig on WW ?? Dave
I ended up buying it for $2850 plus the premium.? I¡¯ve not yet picked it up.? Got the history from Northfield, pretty cool that they keep all that.? They told me to call
back if I win the auction and they will add me to the owner history¡joe
?
?
Joe, I'm thinking 3000-4500.? I don't follow NF much so I could be off.? their jointer commands a premium but I don't know if the 32" saw does.? Dave
What is a 32" Northfield bandsaw be worth?? I will call Northfield monday with the serial number to check the age. Looks relatively new.? 5HP direct drive motor.
|
Re: Northfield 32" Bandsaw
Pics of that machine have been on various sites for a long time.? Went to the dealers site and they have the same two pics of the machine in a barn
and now two pics of a Kundig under power.? Not sure if the same machine.? I think it¡¯s been on Exfactory, Ebay, and now woodweb.
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]>
On Behalf Of David Kumm
Sent: Wednesday, March 3, 2021 5:15 PM
To: [email protected]
Subject: Re: [FOG] Northfield 32" Bandsaw
?
Machinery Exchange at woodweb.com
I did not see the Kundig, what is WW?
?
?
Good to hear.? I have an Oliver 116 that i should sell and figured 3000-3500 so that is close.? Did you see the Kundig on WW ?? Dave
I ended up buying it for $2850 plus the premium.? I¡¯ve not yet picked it up.? Got the history from Northfield, pretty cool that they keep all that.?
They told me to call back if I win the auction and they will add me to the owner history¡joe
?
?
Joe, I'm thinking 3000-4500.? I don't follow NF much so I could be off.? their jointer commands a premium but I don't know if the 32" saw does.? Dave
What is a 32" Northfield bandsaw be worth?? I will call Northfield monday with the serial number to check the age. Looks relatively new.? 5HP direct drive motor.
|
Yep, I have a large bag as well. ?I use a three way valve rigged to the vacuum line and duct tape my Festool to the split in the line. ?Open the valve, evacuate the bag, then turn the Festool off and close the valve. ?Works great.
I was taught that you need to be able to pull 21 inches of mercury to have sufficient pressure in your bag. ?I had a Venturi that I built from Joe Woodworker¡¯s plans. ?It never would pull 21 inches, but I also am at nearly 6,000 feet in elevation. ?As a result, I bought a Veneer Systems pump and couldn¡¯t be happier. ?
toggle quoted message
Show quoted text
On Mar 2, 2021, at 7:52 AM, Jason Holtz < jholtzy@...> wrote:
As Jonathan just mentioned, a fast way to evacuate a large bag is beneficial. We have a 5x10' zipper bag from Vacupress, and use their pump. It takes a long time to suck the air out of that bag with a 3" tall object being veneered. We started using an extra Fein vac that was sitting around, but any noisy shop vac would do. It's easy with the zipper to stick the vac hose in the last little opening, suck it down quick and let the pump take over. Jason Holtz
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406
612.432.2765 -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406
|
Should have no issues, the standard motor on the 2019 k700s that I had seemed to have plenty of power.
toggle quoted message
Show quoted text
On Mar 3, 2021, at 6:49 PM, Philip Davidson <pgdiv4@...> wrote:
? This was a convenient purchase that will cover a pencil post bed and guitar and ukulele necks. ? Philip Davidson? On Mar 3, 2021, at 5:40 PM, David Luckensmeyer <dhluckens@...> wrote:
? Wow. The photo says it all. Nice wood!
Lucky
On 4 Mar 2021, at 8:26 am, Philip Davidson < pgdiv4@...> wrote:
I have an older Kf 700 pro single phase and just ripped 12/4 mahogany board 18 inches wide and 12 feet long. ?Slow the feed when you hear it working hard but the rip blade of 24 teeth works through it. ?I¡¯ve cut thicker stock but not often. <image1.jpeg>Philip Davidson? ? Andrew,
I have a 3kw kf 700 and ripping and crosscutting to 8/4 has been no problem. ?Crosscutting to 12/4 has been fine too. ?I imagine long rips of 12/4 ?might give it trouble but in two years have found the 3kw to be fine. ?
Enjoy your new saw.
Michael
Hi, I am looking to order a k 700 s this week.
where I am at the moment I only have single phase. Does anyone have experience with this saw with felders 3kw single phase motor? I am worried it might not have enough power. My other option is to get the 5.5kw and run a rotary phase converter.
Any information would be much appreciated.
regards
Andrew
-- Philip
-- Philip davidsonukuleles.com
|
Re: Northfield 32" Bandsaw
Machinery Exchange at woodweb.com
toggle quoted message
Show quoted text
I did not see the Kundig, what is WW?
?
?
Good to hear.? I have an Oliver 116 that i should sell and figured 3000-3500 so that is close.? Did you see the Kundig on WW ?? Dave
I ended up buying it for $2850 plus the premium.? I¡¯ve not yet picked it up.? Got the history from Northfield, pretty cool that they keep all that.? They told me to call
back if I win the auction and they will add me to the owner history¡joe
?
?
Joe, I'm thinking 3000-4500.? I don't follow NF much so I could be off.? their jointer commands a premium but I don't know if the 32" saw does.? Dave
What is a 32" Northfield bandsaw be worth?? I will call Northfield monday with the serial number to check the age. Looks relatively new.? 5HP direct drive motor.
|
Re: Northfield 32" Bandsaw
I did not see the Kundig, what is WW?
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]>
On Behalf Of David Kumm
Sent: Wednesday, March 3, 2021 4:44 PM
To: [email protected]
Subject: Re: [FOG] Northfield 32" Bandsaw
?
Good to hear.? I have an Oliver 116 that i should sell and figured 3000-3500 so that is close.? Did you see the Kundig on WW ?? Dave
I ended up buying it for $2850 plus the premium.? I¡¯ve not yet picked it up.? Got the history from Northfield, pretty cool that they keep all that.?
They told me to call back if I win the auction and they will add me to the owner history¡joe
?
?
Joe, I'm thinking 3000-4500.? I don't follow NF much so I could be off.? their jointer commands a premium but I don't know if the 32" saw does.? Dave
What is a 32" Northfield bandsaw be worth?? I will call Northfield monday with the serial number to check the age. Looks relatively new.? 5HP direct drive motor.
|
This was a convenient purchase that will cover a pencil post bed and guitar and ukulele necks. ? Philip Davidson?
toggle quoted message
Show quoted text
On Mar 3, 2021, at 5:40 PM, David Luckensmeyer <dhluckens@...> wrote:
? Wow. The photo says it all. Nice wood!
Lucky
On 4 Mar 2021, at 8:26 am, Philip Davidson < pgdiv4@...> wrote:
I have an older Kf 700 pro single phase and just ripped 12/4 mahogany board 18 inches wide and 12 feet long. ?Slow the feed when you hear it working hard but the rip blade of 24 teeth works through it. ?I¡¯ve cut thicker stock but not often. <image1.jpeg>Philip Davidson? ? Andrew,
I have a 3kw kf 700 and ripping and crosscutting to 8/4 has been no problem. ?Crosscutting to 12/4 has been fine too. ?I imagine long rips of 12/4 ?might give it trouble but in two years have found the 3kw to be fine. ?
Enjoy your new saw.
Michael
Hi, I am looking to order a k 700 s this week.
where I am at the moment I only have single phase. Does anyone have experience with this saw with felders 3kw single phase motor? I am worried it might not have enough power. My other option is to get the 5.5kw and run a rotary phase converter.
Any information would be much appreciated.
regards
Andrew
-- Philip
--
Philip
davidsonukuleles.com
|
Re: Northfield 32" Bandsaw
Good to hear.? I have an Oliver 116 that i should sell and figured 3000-3500 so that is close.? Did you see the Kundig on WW ?? Dave
toggle quoted message
Show quoted text
I ended up buying it for $2850 plus the premium.? I¡¯ve not yet picked it up.? Got the history from Northfield, pretty cool that they keep all that.? They told me to call
back if I win the auction and they will add me to the owner history¡joe
?
?
Joe, I'm thinking 3000-4500.? I don't follow NF much so I could be off.? their jointer commands a premium but I don't know if the 32" saw does.? Dave
What is a 32" Northfield bandsaw be worth?? I will call Northfield monday with the serial number to check the age. Looks relatively new.? 5HP direct drive motor.
|
Re: Northfield 32" Bandsaw
I ended up buying it for $2850 plus the premium.? I¡¯ve not yet picked it up.? Got the history from Northfield, pretty cool that they keep all that.?
They told me to call back if I win the auction and they will add me to the owner history¡joe
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]>
On Behalf Of David Kumm
Sent: Monday, March 1, 2021 8:19 AM
To: [email protected]
Subject: Re: [FOG] Northfield 32" Bandsaw
?
Joe, I'm thinking 3000-4500.? I don't follow NF much so I could be off.? their jointer commands a premium but I don't know if the 32" saw does.? Dave
What is a 32" Northfield bandsaw be worth?? I will call Northfield monday with the serial number to check the age. Looks relatively new.? 5HP direct drive motor.
|
Wow. The photo says it all. Nice wood!
toggle quoted message
Show quoted text
Lucky
On 4 Mar 2021, at 8:26 am, Philip Davidson < pgdiv4@...> wrote:
I have an older Kf 700 pro single phase and just ripped 12/4 mahogany board 18 inches wide and 12 feet long. ?Slow the feed when you hear it working hard but the rip blade of 24 teeth works through it. ?I¡¯ve cut thicker stock but not often. <image1.jpeg>Philip Davidson? ? Andrew,
I have a 3kw kf 700 and ripping and crosscutting to 8/4 has been no problem. ?Crosscutting to 12/4 has been fine too. ?I imagine long rips of 12/4 ?might give it trouble but in two years have found the 3kw to be fine. ?
Enjoy your new saw.
Michael
Hi, I am looking to order a k 700 s this week.
where I am at the moment I only have single phase. Does anyone have experience with this saw with felders 3kw single phase motor? I am worried it might not have enough power. My other option is to get the 5.5kw and run a rotary phase converter.
Any information would be much appreciated.
regards
Andrew
-- Philip
|
I have an older Kf 700 pro single phase and just ripped 12/4 mahogany board 18 inches wide and 12 feet long. ?Slow the feed when you hear it working hard but the rip blade of 24 teeth works through it. ?I¡¯ve cut thicker stock but not often.  Philip Davidson?
toggle quoted message
Show quoted text
On Mar 3, 2021, at 4:15 PM, Michael Todrin <michaeltodrin@...> wrote:
? Andrew,
I have a 3kw kf 700 and ripping and crosscutting to 8/4 has been no problem. ?Crosscutting to 12/4 has been fine too. ?I imagine long rips of 12/4 ?might give it trouble but in two years have found the 3kw to be fine. ?
Enjoy your new saw.
Michael
Hi, I am looking to order a k 700 s this week.
where I am at the moment I only have single phase. Does anyone have experience with this saw with felders 3kw single phase motor? I am worried it might not have enough power. My other option is to get the 5.5kw and run a rotary phase converter.
Any information would be much appreciated.
regards
Andrew
--
Philip
davidsonukuleles.com
|
I have seen a rather in depth install on an older model on youtube, I think he mentions price and where he got the cutterhead from:
Good luck with the install! What year is your AD 741?
-Ameer
|
Whelp, that did not disappoint. Fantastic entry door! I perused the site for a minute and those are some awesome doors. The glass is definitely a nice touch, i remember watching a short youtube video of a door company in california, and they had an awesome glass fabricator too. The one panel they did looked like a watercolor painting, it was sweet. didnt hurt that the shop had a bunch of martin equipment to stare at during the build process.?
How is the door business? Thats the one facet of the craft where i think i would focus if i had to make a living at it.?
On Wed, Mar 3, 2021 at 4:04 PM Shawn Kammerer via <shawnkammerer= [email protected]> wrote:
Patrick, here are a couple screenshots from my website of Greg's door. The glass is by Ted Ellison, and his work is stellar.? -Shawn
On Wednesday, March 3, 2021, 12:39:53 PM PST, Patrick Kane < pwk5017@...> wrote:
You guys keep talking up this front door, we need pics!
Patrick On Tue, Mar 2, 2021 at 10:29 AM, Shawn Kammerer wrote:
Greg, welcome to the group! This wouldn't happen to be the one and only Greg Mix of Danville, CA, would it? This is Shawn, I built your entry door years ago, even though you could have done it yourself. To everyone else, Greg here built the most beautiful grandfather clock I've seen, along with a Blacker armchair, and other various accoutrement. You're welcome here anytime. But sorry, my 941 is not for sale.
-Shawn
|
Andrew,
I have a 3kw kf 700 and ripping and crosscutting to 8/4 has been no problem. ?Crosscutting to 12/4 has been fine too. ?I imagine long rips of 12/4 ?might give it trouble but in two years have found the 3kw to be fine. ?
Enjoy your new saw.
Michael
toggle quoted message
Show quoted text
Hi, I am looking to order a k 700 s this week.
where I am at the moment I only have single phase. Does anyone have experience with this saw with felders 3kw single phase motor? I am worried it might not have enough power. My other option is to get the 5.5kw and run a rotary phase converter.
Any information would be much appreciated.
regards
Andrew
|
Patrick, here are a couple screenshots from my website of Greg's door. The glass is by Ted Ellison, and his work is stellar.? -Shawn
On Wednesday, March 3, 2021, 12:39:53 PM PST, Patrick Kane <pwk5017@...> wrote:
You guys keep talking up this front door, we need pics!
Patrick
On Tue, Mar 2, 2021 at 10:29 AM, Shawn Kammerer wrote:
Greg, welcome to the group! This wouldn't happen to be the one and only Greg Mix of Danville, CA, would it? This is Shawn, I built your entry door years ago, even though you could have done it yourself. To everyone else, Greg here built the most beautiful grandfather clock I've seen, along with a Blacker armchair, and other various accoutrement. You're welcome here anytime. But sorry, my 941 is not for sale.
-Shawn
|
Hi, I am looking to order a k 700 s this week.
where I am at the moment I only have single phase. Does anyone have experience with this saw with felders 3kw single phase motor? I am worried it might not have enough power. My other option is to get the 5.5kw and run a rotary phase converter.
Any information would be much appreciated.
regards
Andrew
|
Johnathan
What its worth will depend on factors like,?
what year it was built
what length of sliding table 900 or 1200mm?
Whether the sliding table was anodised and what condition it is in.
Whether it has the s coupling or the F coupling on the table edges
I've seen one BF6-26 single phase? on Ebay in the last 10 years I believe it went for over ?3,500 may be even ?4K+
There was also a BF6-31 1Ph a few years ago that went for similar money.
Personally I would never part with mine even when I had to put it into storage due to lack of space?
but if you are going to part with it consider splitting off some of the accessories and selling them separately.
Things that are no longer available like:
The high speed router spindle?
Spindle shafts for the single vee belt
S coupling extension tables?
Outrigger table swing arm and long cross cut fence
.
Could all go for quite good amounts as there are a lot of second and third generation owners who call the UK sales office for bits that they cannot supply.
You need to leave all the original kit on the machine itself but the extras could be worth quiet a bit.
Ultimately it will depend on the day if there is some one willing to pay the asking price or if you can create a bidding war.
regards?
Paul
toggle quoted message
Show quoted text
Hi everyone hope all safe? iam contemplating selling my BF 6 -26? as I don't use it as much as I did ,was 3 phase? but had a electronic converter fitted? so it brakes as well , bits and pieces and a dust extractor? could anyone speculate how much its worth
I can't see one for sale anywhere in the UK thanks from Jonathan?
|
Fred Rossi
Joe Jensen
David Luckensmeyer
