Felder tech and I did the same thing with the k700s delivery, here is how the k940s got unloaded...
toggle quoted message
Show quoted text
On Feb 1, 2021, at 9:32 AM, imranindiana via groups.io <imranindiana@...> wrote:
? Apparently std practice to drop the wheel because then the load cannot roll. Agree, I would have a hard time doing so.
Imran
On Feb 1, 2021, at 8:37 AM, David Davies <myfinishingtouch@...> wrote:
? I gasped when the back wheels of the pallet jack rolled off the back end of the lift gate and again when it bobbled on lowering. Dave Davies On Mon, Feb 1, 2021 at 6:34 AM imranindiana via <imranindiana= [email protected]> wrote: PK,
Thanks for sharing. I see felder has made some improvements or maybe AD941 always had a flat back. Looks so much better than my Dual51 circa 2011.
Impressed with the young man. Two utterances I never expected based upon my nephews. Suggestion to sweep floor and comment about machine not being straight. He is a keeper ?
Looking forward to your experience with AD941.
Imran ?I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
-- Dave & Marie Davies
318-219-7868
|
I don¡¯t need any help spending money!! I do a great job of that all by myself. ??
Steve Lyde
toggle quoted message
Show quoted text
On Feb 1, 2021, at 12:04 AM, Joe Jensen <joe.jensen@...> wrote:
?Welcome, we are here to help, mostly to help you spend money, but that's helping too ?
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Steve Lyde via groups.io
Sent: Friday, January 29, 2021 4:55 PM
To: [email protected]
Subject: [FOG] Joining group
New to the group
Steve Lyde
|
Apparently std practice to drop the wheel because then the load cannot roll. Agree, I would have a hard time doing so.
Imran
toggle quoted message
Show quoted text
On Feb 1, 2021, at 8:37 AM, David Davies <myfinishingtouch@...> wrote: ? I gasped when the back wheels of the pallet jack rolled off the back end of the lift gate and again when it bobbled on lowering. Dave Davies On Mon, Feb 1, 2021 at 6:34 AM imranindiana via <imranindiana= [email protected]> wrote: PK,
Thanks for sharing. I see felder has made some improvements or maybe AD941 always had a flat back. Looks so much better than my Dual51 circa 2011.
Impressed with the young man. Two utterances I never expected based upon my nephews. Suggestion to sweep floor and comment about machine not being straight. He is a keeper ?
Looking forward to your experience with AD941.
Imran ?I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
-- Dave & Marie Davies
318-219-7868
|
I gasped when the back wheels of the pallet jack rolled off the back end of the lift gate and again when it bobbled on lowering. Dave Davies
On Mon, Feb 1, 2021 at 6:34 AM imranindiana via <imranindiana= [email protected]> wrote: PK,
Thanks for sharing. I see felder has made some improvements or maybe AD941 always had a flat back. Looks so much better than my Dual51 circa 2011.
Impressed with the young man. Two utterances I never expected based upon my nephews. Suggestion to sweep floor and comment about machine not being straight. He is a keeper ?
Looking forward to your experience with AD941.
Imran ?I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
-- Dave & Marie Davies
318-219-7868
|
PK,
Thanks for sharing. I see felder has made some improvements or maybe AD941 always had a flat back. Looks so much better than my Dual51 circa 2011.
Impressed with the young man. Two utterances I never expected based upon my nephews. Suggestion to sweep floor and comment about machine not being straight. He is a keeper ?
Looking forward to your experience with AD941.
Imran
toggle quoted message
Show quoted text
On Feb 1, 2021, at 12:18 AM, PK <paul.kellymjc@...> wrote: ?I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
|
|
|
I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
|
I too like Ridge Carbide. Awesome customer service too.
Alex B.
toggle quoted message
Show quoted text
On Jan 31, 2021, at 8:29 PM, Cliff Rohrabacher, Esq. <rohrabacher@...> wrote:
?I have ridge carbide on my Bosch 12" glide It's a beast of a blade.
On 1/31/21 6:46 PM, David wrote:
rigid carbide would be another place.
|
|
|
File /Manuals & Drawings/K975 Electrical Drawings - 2006 Machine.pdf uploaded
#file-notice
The following files have been uploaded to
the Files area of the [email protected] group.
By: imranindiana
|
|
|
Imran, Can you just upload to the FOG files?
Bill B¨¦langer?
On Sun, Jan 31, 2021 at 18:20 imranindiana via <imranindiana= [email protected]> wrote: Iain, ? I had to scan at 600dpi for a clear image, so file size is large ¨C 26MB. ? Let me know if Hotmail has an issue with file size. ? Imran ? ? That is very generous of you I have that panel off where the cylinders are. ? ? On Sun, Jan 31, 2021 at 6:56 PM, imranindiana via I can send them in an hour or so but my machine is from 2006 There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
On Jan 31, 2021, at 6:33 PM, iain lowrie via <iain613@...> wrote:
? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.? ?
|
Iain, ? I had to scan at 600dpi for a clear image, so file size is large ¨C 26MB. ? Let me know if Hotmail has an issue with file size. ? Imran ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of iain lowrie via groups.io Sent: Sunday, January 31, 2021 8:10 PM To: [email protected]Subject: Re: [FOG] K 975 wiring ? That is very generous of you I have that panel off where the cylinders are. ? ? On Sun, Jan 31, 2021 at 6:56 PM, imranindiana via groups.io I can send them in an hour or so but my machine is from 2006 There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
On Jan 31, 2021, at 6:33 PM, iain lowrie via groups.io <iain613@...> wrote:
? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.? ?
|
That is very generous of you
I have that panel off where the cylinders are. There is no pouch.
My machine is from 2005.
If you would be so kind? Could you send it to SBDEZINE@...
Very much appreciated.
Thank you iain
On Sun, Jan 31, 2021 at 6:56 PM, imranindiana via groups.io <imranindiana@...> wrote: I can send them in an hour or so but my machine is from 2006.
There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
Imran?
On Jan 31, 2021, at 6:33 PM, iain lowrie via groups.io <iain613@...> wrote:
? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.?
Aaarrrgghhh
|
|
|
Annu, ? As far as Tenryu is concerned here are the options: ? Imran ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of annu.marwaha@... Sent: Sunday, January 31, 2021 6:03 PM To: [email protected]Subject: [FOG] TableSaw Blades ? Hey All,
I¡¯m in need of a 315mm blade, however the felder store is back ordered about 8 weeks. ?Any suggestions on where I can get blades for the felder bore size anywhere else?
-Annu
|
I can send them in an hour or so but my machine is from 2006.
There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
Imran?
toggle quoted message
Show quoted text
On Jan 31, 2021, at 6:33 PM, iain lowrie via groups.io <iain613@...> wrote: ? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.?
Aaarrrgghhh
|
amazon has a few this one is well like Tenryu IW-30050CBD3
Tenryu seem to be quite popular around here.
rigid carbide would be another place.
David
|
Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.?
Aaarrrgghhh
|
toggle quoted message
Show quoted text
Hey All,
I¡¯m in need of a 315mm blade, however the felder store is back ordered about 8 weeks.? Any suggestions on where I can get blades for the felder bore size anywhere else?
-Annu
|
imran
Joe Jensen
PK
Bill Belanger
David