开云体育

Thanks David. I thought that might be the case based upon price of new. Imran

dunno know nuthing? 'bout the Laguna specifically. A start Cap? is out of the loop when the motor is? running.? You engaged it while holding the switch? in the start position then disengaged it

Imran, If you happen to know someone with a woodmizer, they make a blade sharpener that is quite efficient. My buddy just got one, I may have to try it out. Otherwise, we just recycle them. If you

Thanks for the original post and I'm glad your friend is on the mend. I've had some close calls messing with vertical runs of snap lock dust pipe. By design one is reaching out because of the ladder

I do not re-sharpen steel bandsaw blades. I do have my carbide one resharpened though. r/ David

Got back to finishing the project for my neighbor. Smelled burned wood right away on test cut with cypress. I could easily see the part where blade was cutting was black. Not sure if bandsaw ever

Pictures to follow, but this is an extra spindle that came off a pre 2007 CF741 machine, is 30mm bore and appears to be very clean, runs true. I bought the machine used from a Felder dealer who had

Thanks Matt. Bill Bélanger [email protected]> wrote:

It's part of an expanded set of mobility features on the Apple Watch. I could nerd out on this topic for pages but will spare you that. Fall detection is available on series 4 Apple Watch and later.

Hi there Ed, Apologies for the slow reply, I'm not very online and have never used these groups chat thing before. The castors have worked out really well actually, I used 6 because like you, I was

Thanks Matt. Great information. I look forward to the results of your Bluetooth switch experiments. I currently use a Wii Fi switch but am always searching for where I put it down last. Not an apple

Don’t know if this would work for you. https://www.clippard.com/part/PQS-EU08 Billy Click

Hi Ariel, Yes, I drilled about the size hole needed by the probe near the DC. Tied the probe with twist tie so I do not have to hold it. There is no display in probe and results show is blue tooth

Thanks Matt I’ve checked the literature on the apple series 6 watches and can’t find anything about fall detection? Is it there and apple isn’t promoting it? Thanks Bill Bélanger

I have HOLDPEAK 846A Digital Anemometer ( https://www.amazon.com/gp/product/B00UL4BKAE ) which is enough for me to get an idea of air flows. I do not have an RL125, I have an Oneida 3HP cyclone.

I'm a new member who is among the many to take advantage of the pandemic to begin building my long-imagined hobby shop. I've learned a lot already from this group, but I did not think I would have the

Its an L bracket with a block of wood to off set the weight so when lifted with the tables up with a pallet jack it tilts back slightly and is easier and mor balanced to move around. Regards, Mark

Mark, What's going on with the tab you are using under the pallet jack? I just have a bolt there but your solution looks better. Thanks, Dave -- Dave & Marie Davies www.myfinishingtouch.com

would this work

one end is for