Re: VIP Program from Felder
I have a DGL and I like the fact that you can cut an accurate angle to a fraction of a tenth of a degree. The tick marks are at 0.1 degree and you can easily prorate between them. Yes the crosscut length is a bit short but I find the length markings fiddly and just use a clamp anyway.
--
- Dave Rossetti, Santa Fe
|
Re: VIP Program from Felder
Another important difference is the crosscut fence.
DGL has fixed crosscut fence (690mm), EGL has extended crosscut fence up to 1350mm.
690mm is kind of short.
James
On Thu, Dec 10, 2020 at 1:35 PM Brian Lamb < blamb11@...> wrote: DGL, not worth it for the EGL
On Dec 10, 2020, at 10:18 AM, Chris Perren < cperren@...> wrote:
Do most recommend the EGL or DGL?? ? Regards, ? Chris Perren ? ? If someone was thinking about getting and EGL or DGL, now would be the time to buy it.? Normally, when they are added to the sales they're like 3% off. ? On Thu, Dec 10, 2020 at 10:48 AM Brian Lamb <blamb11@...> wrote: The discount isn¡¯t for machines, just tools and accessories. ? On Dec 10, 2020, at 7:24 AM, Stan Blaszczyk <blaszcsj@...> wrote: ? Damn. I just put in for an hs950.?
?
-- Dave & Marie Davies
318-219-7868
|
Re: VIP Program from Felder
DGL, not worth it for the EGL
toggle quoted message
Show quoted text
On Dec 10, 2020, at 10:18 AM, Chris Perren < cperren@...> wrote:
Do most recommend the EGL or DGL?? ? Regards, ? Chris Perren ? ? If someone was thinking about getting and EGL or DGL, now would be the time to buy it.? Normally, when they are added to the sales they're like 3% off. ? On Thu, Dec 10, 2020 at 10:48 AM Brian Lamb <blamb11@...> wrote: The discount isn¡¯t for machines, just tools and accessories. ? On Dec 10, 2020, at 7:24 AM, Stan Blaszczyk <blaszcsj@...> wrote: ? Damn. I just put in for an hs950.?
?
-- Dave & Marie Davies
318-219-7868
|
Re: electrical features for sawblade on KF700
Pro:? It's gee wiz cool and allows you to return to pre-sets.
Con: big $$$, and something else to break or malfunction.?? We all know how how reliable electronics can be sometimes and future availability of parts can be a crap shoot.
|
Re: VIP Program from Felder
On Thu, Dec 10, 2020 at 11:18 AM, Chris Perren wrote:
Do most recommend the EGL or DGL??
Great question, interested to know the answer also, Bill
|
Re: VIP Program from Felder
Do most recommend the EGL or DGL?? ? Regards, ? Chris Perren ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of David Davies Sent: Thursday, December 10, 2020 11:00 AM To: [email protected]Subject: Re: [FOG] VIP Program from Felder ? If someone was thinking about getting and EGL or DGL, now would be the time to buy it.? Normally, when they are added to the sales they're like 3% off. ? On Thu, Dec 10, 2020 at 10:48 AM Brian Lamb <blamb11@...> wrote: The discount isn¡¯t for machines, just tools and accessories. ? On Dec 10, 2020, at 7:24 AM, Stan Blaszczyk <blaszcsj@...> wrote: ? Damn. I just put in for an hs950.?
?
-- Dave & Marie Davies
318-219-7868
|
Re: VIP Program from Felder
If someone was thinking about getting and EGL or DGL, now would be the time to buy it.? Normally, when they are added to the sales they're like 3% off. Dave Davies
On Thu, Dec 10, 2020 at 10:48 AM Brian Lamb < blamb11@...> wrote: The discount isn¡¯t for machines, just tools and accessories.
On Dec 10, 2020, at 7:24 AM, Stan Blaszczyk < blaszcsj@...> wrote:
Damn. I just put in for an hs950.?
-- Dave & Marie Davies
318-219-7868
|
|
|
Thanks Jonathan. stop-water is interesting idea. i will have to double check my pics if they used them on viking ships i saw in Colorado and Minnesota. missed it on PBS show about restoring schooner coronet, although they may not have used them with modern glues.
Shop doors are okay as this was 20 yrs ago and i was learning carpentry/framing building the shop. i did everything except roof decking & shingles, wife put the kabbash on that.
so tops of rails should have been beveled to shed water. the Xs should have stopped short of corner to allow caulking of the rail/stile intersection as i have done on the left side on the new outer skin.
yes a long diagonal can be done but it would be easier to do two and i cannot see that one is superior to two.
imran?
toggle quoted message
Show quoted text
On Dec 10, 2020, at 10:43 AM, Jonathan Smith <jonathan.smith@...> wrote: ?Imran,
I was only referring to x's as structures, not your doors specifically.? I like your doors and barn. Very handsome.? Not too crazy about the snow though.? Stop-waters are used at joints in wood ship keels where timbers meet.? They are a dowel set across the joint that causes water that gets in between to exit and not carry on to the next beam.? A door could have the hole without the dowel to drain what gets in.? I live in the desert so even fence posts hardly ever rot.? On bracing, a longer piece might tend to bow more causing sag but there are ways to handle that.? If nature abhors a vacuum it at least disfavors a cantilever.?
|
Re: Auction of New Casadei Machines - Duluth, GA
Casadei is owned by SCMI.? the machines are very close to SCMI in design and build but priced a little better.? There may be some internal differences but they are generally pretty decent machines.? Dave
toggle quoted message
Show quoted text
I am not super familiar with all industrial manufacturers but find F25 shaper in this auction interesting. For people with concerns of height variation with sliding tables, this one has fixed table but allows for a short slider for tenons. I know Martin has
that option but that is out of price range for most. More interesting, it shows shaper fence mounted 90 deg to normal and a sliding table attachment mounted to the side. I have not seen this before but like I said I am not super familiar with all that is out
there.
?
Imran
?
From: [email protected] On Behalf Of imranindiana via groups.io
Sent: Thursday, December 10, 2020 10:19 AM
To: [email protected]
Subject: [FOG] Auction of New Casadei Machines - Duluth, GA
?
|
Imran,
I was only referring to x's as structures, not your doors specifically.? I like your doors and barn. Very handsome.? Not too crazy about the snow though.? Stop-waters are used at joints in wood ship keels where timbers meet.? They are a dowel set across the joint that causes water that gets in between to exit and not carry on to the next beam.? A door could have the hole without the dowel to drain what gets in.? I live in the desert so even fence posts hardly ever rot.? On bracing, a longer piece might tend to bow more causing sag but there are ways to handle that.? If nature abhors a vacuum it at least disfavors a cantilever.?
|
Re: Auction of New Casadei Machines - Duluth, GA
I am not super familiar with all industrial manufacturers but find F25 shaper in this auction interesting. For people with concerns of height variation with sliding tables, this one has fixed table but allows for a short slider for tenons. I know Martin has that option but that is out of price range for most. More interesting, it shows shaper fence mounted 90 deg to normal and a sliding table attachment mounted to the side. I have not seen this before but like I said I am not super familiar with all that is out there. ? Imran ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of imranindiana via groups.io Sent: Thursday, December 10, 2020 10:19 AM To: [email protected]Subject: [FOG] Auction of New Casadei Machines - Duluth, GA ?
|
Auction of New Casadei Machines - Duluth, GA
|
Re: Looking to purchase Sliding table saw or combo machine
There is a like new MM combo for sale in Michigan if you or anyone has an interest.? I can forward the info.? Dave
toggle quoted message
Show quoted text
Looking to buy a newer Felder sliding table saw or combo machine, single phase hopefully in Northern CA. ?Thanks!
R. Mike B.
|
Re: electrical features for sawblade on KF700
I just ordered thr KF700SP.? There is a package deal on full power drive.? Not that much more than manual with indicators.?
PK
|
|
|
Re: VIP Program from Felder
Damn. I just put in for an hs950.?
|
Imran,
???????? Your doors look really nice. That's one of my favorite colors too.? There's so many ways to make doors, whatever works. ?
|
Re: electrical features for sawblade on KF700
well, the pros and cons are obvious, fast, easy and pricey :)
It really depends on what you do. If you frequently?need to make the non-thru cut at different height and angle, then it is worth it. Otherwise, forget about it.??
Get DRO on crosscut / rip fence and digital height adjustment for the shaper. That is what I have for my KF700sp, no regrets.
James
On Wed, Dec 9, 2020 at 11:28 PM Acharya Kumarnathaswami < kumar@...> wrote: Can anyone share the pros and cons of?electrical height adjustment and angle adjustment of the sawblade on the KF700 (or other Felder slider saw). I am planning a purchase. Slider will be 9 feet. It's a pricy option, but not something one can get later; wondering if it's worth it.??
|
electrical features for sawblade on KF700
Can anyone share the pros and cons of?electrical height adjustment and angle adjustment of the sawblade on the KF700 (or other Felder slider saw). I am planning a purchase. Slider will be 9 feet. It's a pricy option, but not something one can get later; wondering if it's worth it.??
|
Dave Rossetti
imran
Jonathan Smith
PK