开云体育

It sure is convenient when working with full sheets of plywood. It’s a nice to have, definitely not a necessity unless you can’t stand crawling under a sheet of plywood loaded on the slider after

I wanted to see if anyone knows the depth of cut available when using the Felder Adjustable Groover as a tenon cutter on the shaper? Here is the link to the exact

I am not sure what the cost was but I did use mine a lot wrote: Thank you Michael

I agree with John, if a lot of 1/2 to full sheets then worthwhile if you like to turn the saw on/off with sheet loaded otherwise it’s a nice to have. I typically just turn the saw on and go, I

There used to be instructions in the files section for building your own start switch. It's wired but seemed fairly simple to make. Dave Davies wrote: -- Dave & Marie Davies www.myfinishingtouch.com

If you do a lot of large panel work, IMHO definitely worth it. wrote: -- John Kee JMK Services

I'm looking for insights and experience for deciding whether it's worth the extra cost to get the option of power switches on the end of the slider for a KF 700. (Cost is $1,000-plus, I think.) Is it

Brian, you should fact check your statement.

Starting to drift, or already a flaming dumpster fire of misinformation? I second David's suggestion. Patrick [email protected]> wrote:

Sure, if you expect to be walking around the machine it is a trip hazard. Believe me, you are doing the right thing by staying away from mag base. When things go wrong there could be a big impulse of

This is starting to drift into political posturing. My request is that we drop this topic before the culture war infects this forum. David Best https://www.flickr.com/photos/davidpbest/albums

Interference of the extra long horizontal pipe during the 99%+ of the time the feeder will be folded down. From the pictures people have shared it looks like the standard feeder folds in fairly well

Why do you say, forget using it in the saw? Imran

My two head gets 120-180. The machine has basic adjustments and shares one motor. When I need a lower grit, I remove the platen to take the second head out of the picture so I don't mess with the

Thanks for all the pictures and input. Should I forget about using it on the saw and just get the tilting bracket plus a DC40? It seems like overkill for what I need, but I would prefer if possible to

A close friend is a Dr volunteer on the county medial board for Maricopa Co AZ. Apparently 80% of AZ deaths are in nursing homes or on the Navajo Nation where 38% of home have no running water. The

Tough spot to be in, especially with the media hype and hysteria. The regular flu kills 50k-80k people a year and nobody gets their knicker in a knot over that… and before someone says this is going

We have 120 on our machine most times. We buy 60 and 80 for slab leveling work, and also 180. As Dave said, the 180 with the platten leaves a remarkable surface. That's a nice little machine, you'll

Thanks David. Placed order with Klingspore. They have $7.99 flat rate shipping right now. Not sure if they usually do this. Last time I ordered from them was many yrs ago. Imran

Thanks John.