开云体育

No problem, wasn’t aware it was an issue. I knew I got them both from the group and the poster, but thought it was because of being the owner. Easy to change, so it shouldn’t be an issue any

For Sale - Nordfab vacuum pipe for dust/wood chip collection Lengths of Pipe:? Galvanized, 22 gauge, rolled lip Quick Fit ends Size (diameter) * # list price Total 7 inches 2 $51.20 $102.40 6 inches

Thanks Brian

Mine is about 12 inches from the wall. I have no problems! Un Saludo Warren Batt +34 663 629 990<tel:+34%20663%20629%20990> madedemadera.com<http://madedemadera.com/>

Mark T, I used an anemometer I borrowed from work can’t remember the name right now but it’s pretty fancy and costs something like $2500-3k. Regards, Mark

Brett is correct - the guard extends and flips down so you need at least enough space to clear that motion. I measured that section of the guard and it's approximately 15", so Felder's reco of 20" is

I confirm, Everything that is small enough to fit between the blade and the plastic side goes up with an RL140 used for bottom and top extraction only. Size and weight, to a certain extent, do no

I have a vacuum plenum in the center of our machine pool, backing up directly to the ad941, and we squeezed as tight as possible but ad941 articulating rear cutter guard will stick out and catch on

How far from the wall do we need to be with the AD 941 or 951? The manual says 20". But that seems excessive.

I am taking about the port on the euro style riving knife guard, not the overhead guard system. The port on the euro guard is only 50mm. A couple of users seem to have been able to increase that

Just curious how you're measuring flow? I've had a $50 vane anemometer for many years, but some folks say they are not very reliable. A while ago I got a "professional grade" differential manometer

Makes more sense martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell 608-824-0023 fax airtightclamps@... airtightclamps.com Designing and building

“Switched it to a 6” wye” Regards, Mark

Mac, now the pulley is separate from the motor , a keyed with set screw type of affair. At least on the 4hp single phase Regards, Mark

Never tried 3” but Before I made the 3d printed 4in port i took off the stock 3” port and just squeezed/forced a 4” hose over the rectangular tube on the guard and that went to a 5” wye the

They are pressed on or at least they used to do it that way, kinda weird if u ask me. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell 608-824-0023

I really don’t think there is much value to increasing at the guard just drop a 5” from the ceiling with a 5x5x3 and few feet of 3 flex. 5 to lower saw and 3 to hood Second drop the same for

I changed the group settings today to be reponses only to the group. It might take a bit for the messages to stop coming to everybody twice, but it will happen. =============== Brian Lamb

Check this thread, /g/felderownersgroup/topic/jet_dust_collector/71097689?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,60,71097689 Mac, I think, just removed the plastic adapter and

I'm interested in modifying the standard euro guard for the KF700 I am getting soon and hope to learn from what you folks put together. I would like to increase the size of the opening in the guard,