开云体育

Jonathan, I actually enjoy photography very much. I would enjoy such a book very much. Maybe once my better half retires I could work on that during our travels. Imran ? Imran Great photo, thanks

Imran Great photo, thanks for sharing! I would like to see a coffee table book of "woodworking machines from around the world" now that you are retired it might be a good project for you ? Jonathan

Imran, i could not really tell but l see the jointer bed but is there a saw and what looks like a horizontal mortiser on the end? Glen Big Tree Woodworking P.O. Box 257 Avery Ca 95224

No code compliance concerns with wire gauge based upon length ? I see at least two different types of wire and electrical tape everywhere, perhaps to make repairs. Imran ?Nice long power line, so

Nice long power line, so owner can roll to various jobs. Mike Ward

?Notice the helmet on handle bar of the motorcycle instead of on the head. Imran ?I saw this yesterday in local market. They were edging sheets and I could smell it from distance. It was still

In Pakistan. Market by my parents house in the town of Wah Cantt. Imran ?Imran, Where is that picture taken. Jon S

Imran, Where is that picture taken. Jon S

I saw this yesterday in local market. They were edging sheets and I could smell it from distance. It was still there this morning so thought I share. Imran

Are the issues people reported here with noise due to not having the segmented pressure bar? Another advantage of segmented pressure bar (per Felder) is planing of thinner stock. Another option

Thanks Jonathan, Nice looking work I might add. My first move is to move up to bottom mount slides. Glen Big Tree Woodworking P.O. Box 257 Avery Ca 95224 wrote:

Most planers over 20" have the segmented chipbreaker ( pressure beam ). When I buy used, those parts and springs are the first to have problems but if buying new, not an issue. I'm to the age where

Lining up my wish list for the AD951 and KF 700, with the help of forum members I am clear on the overheadhead guard for the KF, and saving $750 (much needed) by not getting the integrated adjustable

Hi Mark, <<The PP produces Delta 3 Phase, which by definition has one leg at 208v to ground, and two legs at 120v to ground.? The 208v leg is called the "high leg.">> You may be in for a surprise as

According to the manual even after you disconnect power, it says to wait 30 minutes for internal charges to dissipate before servicing. Glen Big Tree Woodworking P.O. Box 257 Avery Ca 95224

I cut the power to the PP to turn it off. I'm too clumsy and forgetful. Dave ________________________________ Sent: Tuesday, February 18, 2020 8:35 PM To: imranindiana <imranindiana@...>;

Thanks Michael, Yes I am disappointed in the slides I got, I just ordered some Blum under mounts and going to mock up a drawer and see how they do. I may just switch over to that. Glen Big Tree

Right, so when's it off you can't start motor but you can kill yourself ;-)

Mark, I found that out the hard way. Even though there is voltage to ground there is no voltage phase to phase. I posted here to verify this before working on downstream circuits. Previously, I only

Because of your earlier comments regarding the droop, I build stronger brackets while assembling my saw. The arm still droops when it's at a right angle, but it's less than a couple inches. Not really