On Oct 16, 2024, at 11:24?AM, David via groups.io <david.hawxhurst@...> wrote:

Been building my man cave for a while now. Like to think i'm in the home stretch of building anyways. Still have plumbing and flooring to pour. Yes, pex will be laid out for hydronic heating. Once in a lifetime deal. But in the meantime time work out some shop ideas. for current shop and when I move over to the new shop. Everyone here has said build bigger than you think you need cause you'll wish you would've built bigger. So true. I did build bigger than I thought I would ever need. Now thinking go should have made it bigger. Cause 3200 sq.ft. isn't enough. weird right. but space gets consumed quickly. RV, 20k 2 post lift, motorcycle lift, classic car parking and motorcycle parking. there goes almost 2000 sq.ft. Haven't even laid out the shop space yet. But moving on.

?

Been looking for some 3d models to models for sketch-up or fusion 360. Sketch-up has a couple like the kf700 saw but not the kf700sp but the kf700 will work for my needs. the have a AD741 may it was AD9?? (what ever is the 410mm). but can't seem to find any other machines. like bandsaws and dust collectors.

?

Does anyone know where to find any of the Felder 3d models. Don't need work ones just need them for foot print and shop layout. Seems 3d model your shop will be easier and faster to get a decent idea of how things will fit and functions.

?

Looks for band saw FB600/610. KF700sp (10'ft slider), AD741.?

Other models like stand alone jointers and planers, shapers, edge sanders and dust collection would also be nice.

On Oct 14, 2024, at 10:37?AM, Wade Dees via groups.io <wjdsignature@...> wrote:

?

Is there a protective film sitting over the display. ?

Wade

On Oct 14, 2024, at 8:22 AM, Shinta Wakahisa via groups.io <vnh84@...> wrote:

?

Hello everyone.? I have an interesting problem.? Two of the digital flip stop LCDs have developed this haziness.? I am not sure when it started because I haven't used the saw for a while.? Only the LCDs of the cross-cut fence have this problem.? The LCDs of the rip fence and the option-604-118 flip stop are clear, no fogging.? I contacted Felder asking for advise on buffing/cleaning this.? Tech support responded with proposal to replace the LCDs, no advise on solution for buffing/cleaning.??

?

<KF700SP_digi_stop_fogging_01.jpg>

?

<KF700SP_digi_stop_fogging_02.jpg>

?

I have yet to see this problem surfaced on FOG.? Any suggestion on a cleaning/buffing technique and chemical?? This reminds me of automobile head light plastic housing developing a haziness over time.??

?

Felder quotes $104 for each LCD.? Shipping cost is quoted to be $50-70.? For two LCDs that is match-box size and weigh about 1-2 oz combined, I wonder why the shipping cost is so high.??

?

Thanks.

SW

On Oct 14, 2024, at 8:22 AM, Shinta Wakahisa via groups.io <vnh84@...> wrote:

?

Hello everyone.? I have an interesting problem.? Two of the digital flip stop LCDs have developed this haziness.? I am not sure when it started because I haven't used the saw for a while.? Only the LCDs of the cross-cut fence have this problem.? The LCDs of the rip fence and the option-604-118 flip stop are clear, no fogging.? I contacted Felder asking for advise on buffing/cleaning this.? Tech support responded with proposal to replace the LCDs, no advise on solution for buffing/cleaning.??

?

?

?

I have yet to see this problem surfaced on FOG.? Any suggestion on a cleaning/buffing technique and chemical?? This reminds me of automobile head light plastic housing developing a haziness over time.??

?

Felder quotes $104 for each LCD.? Shipping cost is quoted to be $50-70.? For two LCDs that is match-box size and weigh about 1-2 oz combined, I wonder why the shipping cost is so high.??

?

Thanks.

SW

On Oct 13, 2024, at 11:03?AM, Bill Belanger <bllblngr@...> wrote:

?For what it’s worth, I had that little fence on my K915 and I don’t have it on my Kappa 400 and I don’t miss it a bit. I’ve never said “I wish I had that fence”. With Macs clamps and Brian’s parallel fence I’ve never even thought about putting the wood in front of the fence. So for those ordering a new saw I would suggest to save the money. Maybe for those who have it already, just set it aside and see what happens. My two cents?

Bill Belanger

On Oct 12, 2024, at 19:30, David P. Best via groups.io <dbestworkshop@...> wrote:

?The only accurate reference surfaces on the X-Roll sliding table are the two chamfered surfaces on the top of the P-channel. ? Otherwise, the sliding table is an aluminum extrusion made by squirting molten aluminum through a die in a manner similar to how Macroni is made, with features that vary as much as ±1mm. ?Have a look at the following post from earlier that discusses this aspect. ?

/g/felderownersgroup/message/134309?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Acreated%2C%2Csaddle%2C20%2C2%2C0%2C103747009

The outrigger table aligns via this angled and machined surface with two saddles that mesh with the angled profile, and is the mechanism by which the outrigger table (and fence that attaches to it) go off and on the machine yet consistently register square to the travel of the sliding table.

Machines with a longer sliding table are typically delivered as a “kit” with the sliding table and overhead saw guards removed for transport, and thus require precise calibration and alignment during installation. ?You can see what’s involved in aligning the sliding table by watching?, and for a $1,500 fee, Felder will send a technician to your shop to commission the machine and do the necessary calibrations and alignments, although not to the same level of accuracy as the method I document. ?If you do plan to install and commission the machine yourself, you will need some specialized tools to do the job -??is my curated list of ideal tools for this purpose. ???will show you the quickest and most accurate method of squaring a crosscut fence on the sliding table (the fence on the outrigger, or the shorter alternatives). ?Lots of ?other Felder-related resources on my??and?.

Please sign your posts so we know who you are.

David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best

On Oct 12, 2024, at 11:22?AM, Michael Wolf via groups.io <missingeggacct@...> wrote:

Indeed there is a design flaw with the Felder short (1100mm) crosscut fence for the X-Roll sliding tables. ?Full analysis is covered in a series of videos at the following link:

?

David,

?

those links are very informative, thanks.? As someone who doesn't currently own a Felder slider, but is just thinking of buying one, looking at what you had to do fills me with a certain amount of anxiety.? The implication is that Felder isn't overly concerned about how accurately the saw parts are machined, and that each saw purchased may have an unpredictable set of problems.? More generously, perhaps they just don't view the t-slot on the slider as needing to be accurate, and the rest of the machining gets more attention.? But I'd imagine that most people would hope for the t-slot to be something they could use for attaching accurate jigs.

?

I wonder if anyone has established with Felder which parts of the slider are intended to be accurately machined and can be referenced off of, and which are not?

On Oct 12, 2024, at 19:30, David P. Best via groups.io <dbestworkshop@...> wrote:

?The only accurate reference surfaces on the X-Roll sliding table are the two chamfered surfaces on the top of the P-channel. ? Otherwise, the sliding table is an aluminum extrusion made by squirting molten aluminum through a die in a manner similar to how Macroni is made, with features that vary as much as ±1mm. ?Have a look at the following post from earlier that discusses this aspect. ?

/g/felderownersgroup/message/134309?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Acreated%2C%2Csaddle%2C20%2C2%2C0%2C103747009

The outrigger table aligns via this angled and machined surface with two saddles that mesh with the angled profile, and is the mechanism by which the outrigger table (and fence that attaches to it) go off and on the machine yet consistently register square to the travel of the sliding table.

Machines with a longer sliding table are typically delivered as a “kit” with the sliding table and overhead saw guards removed for transport, and thus require precise calibration and alignment during installation. ?You can see what’s involved in aligning the sliding table by watching?, and for a $1,500 fee, Felder will send a technician to your shop to commission the machine and do the necessary calibrations and alignments, although not to the same level of accuracy as the method I document. ?If you do plan to install and commission the machine yourself, you will need some specialized tools to do the job -??is my curated list of ideal tools for this purpose. ???will show you the quickest and most accurate method of squaring a crosscut fence on the sliding table (the fence on the outrigger, or the shorter alternatives). ?Lots of ?other Felder-related resources on my??and?.

Please sign your posts so we know who you are.

David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best

On Oct 12, 2024, at 11:22?AM, Michael Wolf via groups.io <missingeggacct@...> wrote:

Indeed there is a design flaw with the Felder short (1100mm) crosscut fence for the X-Roll sliding tables. ?Full analysis is covered in a series of videos at the following link:

?

David,

?

those links are very informative, thanks.? As someone who doesn't currently own a Felder slider, but is just thinking of buying one, looking at what you had to do fills me with a certain amount of anxiety.? The implication is that Felder isn't overly concerned about how accurately the saw parts are machined, and that each saw purchased may have an unpredictable set of problems.? More generously, perhaps they just don't view the t-slot on the slider as needing to be accurate, and the rest of the machining gets more attention.? But I'd imagine that most people would hope for the t-slot to be something they could use for attaching accurate jigs.

?

I wonder if anyone has established with Felder which parts of the slider are intended to be accurately machined and can be referenced off of, and which are not?

On Oct 12, 2024, at 11:22?AM, Michael Wolf via groups.io <missingeggacct@...> wrote:

Indeed there is a design flaw with the Felder short (1100mm) crosscut fence for the X-Roll sliding tables. ?Full analysis is covered in a series of videos at the following link:

?

David,

?

those links are very informative, thanks.? As someone who doesn't currently own a Felder slider, but is just thinking of buying one, looking at what you had to do fills me with a certain amount of anxiety.? The implication is that Felder isn't overly concerned about how accurately the saw parts are machined, and that each saw purchased may have an unpredictable set of problems.? More generously, perhaps they just don't view the t-slot on the slider as needing to be accurate, and the rest of the machining gets more attention.? But I'd imagine that most people would hope for the t-slot to be something they could use for attaching accurate jigs.

?

I wonder if anyone has established with Felder which parts of the slider are intended to be accurately machined and can be referenced off of, and which are not?