开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Expanded Topics Messages Polls
Date
Re: Upgrading slider

 

开云体育

Okay, things have changed. Mine has both scales. I would ask Felder to swap the telescoping part if machine comes with wrong scale.

Imran Malik

On Sep 8, 2024, at 10:32?PM, netanel.belgazal via groups.io <netanel.belgazal@...> wrote:

?
<photo-1.jpg>
Re: Upgrading slider

 

开云体育

Yes, the telescoping fence scale is permanent. It is not a replaceable scale because both metric and imperial are there. My saw is old, unless things have changed, it is an option so really not something to gripe about.

Imran Malik

On Sep 8, 2024, at 10:20?PM, netanel.belgazal via groups.io <netanel.belgazal@...> wrote:

?
on the telescope fence, the scale is glued to the fence and you adjust the fence itself.?
Re: Upgrading slider

 

Re: Upgrading slider

 

on the telescope fence, the scale is glued to the fence and you adjust the fence itself.?
Re: Upgrading slider

 

开云体育

Are you sure about glued scale? How would one align?

I have KF700 and K975, neither with glued scale.

Imran Malik

On Sep 8, 2024, at 9:40?PM, pierre.bourassa via groups.io <pierre.bourassa@...> wrote:

?
Same experience for me, I ordered metric and got imperial. Felder shipped both replacement scales. Easy to install the rip fence scale, but the crosscut is a bit trickier as it is glued and is quite rigid.
Re: Upgrading slider

 

i got the replacement scale and installing them was relatively easy.
?
Re: Upgrading slider

 

Same experience for me, I ordered metric and got imperial. Felder shipped both replacement scales. Easy to install the rip fence scale, but the crosscut is a bit trickier as it is glued and is quite rigid.
Re: Upgrading slider

 

开云体育

I’d take the hand wheel now knowing what power drive is all about. ?

I’m almost ready to sell off my Felder stuff. ?But I have a bad history with their equipment. ?Which just makes me lean further that way to get rid of it.?

Wade

On Sep 8, 2024, at 3:26?PM, netanel.belgazal@... wrote:

?
I still thinks it is better than hand wheel, but for almost additional $2k, I would expect something more refined.?
Re: Upgrading slider

 

I still thinks it is better than hand wheel, but for almost additional $2k, I would expect something more refined.?
Re: Upgrading slider

 

开云体育

Yeah, it’s on my planer and drives me nuts there too. ?It’s not refined enough to be easy to dial in. ?

On the table saw, trying to dial in a dado height can be a big PITA!



On Sep 8, 2024, at 12:59?PM, netanel.belgazal@... wrote:

?
Bummer :/
?
Luckily for most operations on the table saw, I don’t need to set the hight to 0.1mm accuracy.
?
I can’t imagine having this mechanism on machines like planer or shaper.
?
Re: Upgrading slider

 

开云体育

This comes up often. System is not w/o flaw. Give it a sharp tap. After practice, on occasion I get a 10 thou advance vs 5 thou. This on a Dual 51.

Imran Malik

On Sep 8, 2024, at 3:59?PM, netanel.belgazal via groups.io <netanel.belgazal@...> wrote:

?
Bummer :/
?
Luckily for most operations on the table saw, I don’t need to set the hight to 0.1mm accuracy.
?
I can’t imagine having this mechanism on machines like planer or shaper.
?
Re: Upgrading slider

 

Bummer :/
?
Luckily for most operations on the table saw, I don’t need to set the hight to 0.1mm accuracy.
?
I can’t imagine having this mechanism on machines like planer or shaper.
?
Re: Upgrading slider

 

开云体育

No it’s that bad and annoying for me. ?Won’t ever buy another one with power drive.?

Wade

On Sep 8, 2024, at 11:22?AM, netanel.belgazal@... wrote:

?
Reporting back on the K2 powerdriver.
?
It is really nice to be able to dial in the angle/height electronically, however I do have an issue with small height increments. Instead of raising the blade by 0.1mm each press, it usually increase it by 0.2-0.3 and the button is really sensitive. It might take me 2-3 trials to dial in the exact height.
for the tilt adjustment, it works perfectly and adjust the angle by 0.1 deg each press.
?
What is your expertise with the powerdriver?
Is it inherently that bad or is it a faulty unit I got?
Re: Upgrading slider

 

Reporting back on the K2 powerdriver.
?
It is really nice to be able to dial in the angle/height electronically, however I do have an issue with small height increments. Instead of raising the blade by 0.1mm each press, it usually increase it by 0.2-0.3 and the button is really sensitive. It might take me 2-3 trials to dial in the exact height.
for the tilt adjustment, it works perfectly and adjust the angle by 0.1 deg each press.
?
What is your expertise with the powerdriver?
Is it inherently that bad or is it a faulty unit I got?
Re: A3-41 Parts Diagrams

 

开云体育

Jeff, I have received manuals from Felder for at least 2 used machines. I prefer a soft copy as it is accessible on my phone and computer. Manuals stay in a safe place but I do pull them out when calibrating where I want to see larger images.

Imran Malik

On Sep 7, 2024, at 10:28?AM, jeff.hall via groups.io <jeff.hall@...> wrote:

?

I bought it used so no salesperson. I did ask the tech I'd been emailing back and forth with, but it was towards the end of the day so not sure I'll hear anything back until next week.

?

?

From: [email protected] <[email protected]> On Behalf Of imranindiana
Sent: Friday, September 6, 2024 8:46 PM
To: [email protected]
Subject: Re: [FOG] A3-41 Parts Diagrams

?

Jeff,

?

There is C3-31 (full combo) in the files section which may give you some idea. I suggest that you ask you Felder sales person to provide you with a copy. He/She will send you a link to download.

?

Imran Malik

?

?

From: [email protected] On Behalf Of jeff.hall via groups.io
Sent: Friday, September 06, 2024 8:08 PM
To: [email protected]
Subject: [FOG] A3-41 Parts Diagrams

?

When you buy a new Hammer product, does it come with parts diagrams and/or exploded views of any kind?

?
Re: A3-41 Parts Diagrams

 

开云体育

I bought it used so no salesperson. I did ask the tech I'd been emailing back and forth with, but it was towards the end of the day so not sure I'll hear anything back until next week.

?

?

From: [email protected] <[email protected]> On Behalf Of imranindiana
Sent: Friday, September 6, 2024 8:46 PM
To: [email protected]
Subject: Re: [FOG] A3-41 Parts Diagrams

?

Jeff,

?

There is C3-31 (full combo) in the files section which may give you some idea. I suggest that you ask you Felder sales person to provide you with a copy. He/She will send you a link to download.

?

Imran Malik

?

?

From: [email protected] On Behalf Of jeff.hall via groups.io
Sent: Friday, September 06, 2024 8:08 PM
To: [email protected]
Subject: [FOG] A3-41 Parts Diagrams

?

When you buy a new Hammer product, does it come with parts diagrams and/or exploded views of any kind?

?
Re: A3-41 Parts Diagrams

 

Try Google Translate.? It is amazing.??
Re: A3-41 Parts Diagrams

 

开云体育

Imran

Thanks for the tip, but unfortunately the C3 jointer tables are nothing like the A3-41. Appreciate the thought though.

?

?

From: [email protected] <[email protected]> On Behalf Of imranindiana
Sent: Friday, September 6, 2024 8:46 PM
To: [email protected]
Subject: Re: [FOG] A3-41 Parts Diagrams

?

Jeff,

?

There is C3-31 (full combo) in the files section which may give you some idea. I suggest that you ask you Felder sales person to provide you with a copy. He/She will send you a link to download.

?

Imran Malik

?

?

From: [email protected] On Behalf Of jeff.hall via groups.io
Sent: Friday, September 06, 2024 8:08 PM
To: [email protected]
Subject: [FOG] A3-41 Parts Diagrams

?

When you buy a new Hammer product, does it come with parts diagrams and/or exploded views of any kind?

?
Re: Format4 Kappa 400 x-motion for sale #format4 #forsale

 

Sold,
?
Thanks for the kind words!
?
PK
Re: A3-41 Parts Diagrams

 

开云体育

Jeff,

?

There is C3-31 (full combo) in the files section which may give you some idea. I suggest that you ask you Felder sales person to provide you with a copy. He/She will send you a link to download.

?

Imran Malik

?

?

From: [email protected] On Behalf Of jeff.hall via groups.io
Sent: Friday, September 06, 2024 8:08 PM
To: [email protected]
Subject: [FOG] A3-41 Parts Diagrams

?

When you buy a new Hammer product, does it come with parts diagrams and/or exploded views of any kind?

?
3781 - 3800 of 141078