Re: Kappa 400 has arrived
Thanks for all the comments, I have greatly appreciated this group and have spent many hours researching all the options. The technician opened up the
|
Re: Kappa 400 has arrived
Imran,
That looks exactly like my electrical cabinet, gasket and all...? Those are definitely for wire management.? The wiring inside mine looks exactly the same including how the red wires go up the saw on the left hand side!
will it go through this time???
|
Re: Kappa 400 has arrived
Once again beautiful shop and saw.
Electrical cabinet has a gasket, nice?. In the electrical cabinet, what is the purpose of what looks like shelving and partitions. Since everything is on DIN Rail, I can only imagine it is for wire management.
Imran?
toggle quoted message
Show quoted text
On Aug 5, 2021, at 4:11 PM, JP Rice via groups.io <jprphotos@...> wrote: ?Well after 8 months of waiting my new Kappa 400 X-Motion to arrive I got it commissioned by FELDER yesterday. Actually had two technicians do the commissioning, one was being trained. They did a great job and I was very pleased with the outcome. A friend of mine actually received the saw at his business and brought it over to my shop last week and set it in place for me. Friends with forklifts are a wonderful thing. Really looking forward to putting it to work tonight, I have been without a saw since last Jan. when I sold my K500. I took advantage of the downtime to reconfigure my shop in preparation for this day. Upgraded the lighting, had Phase Perfect unit installed and electrical run for the saw, had floors epoxy coated, cleared out many things that took up too much floor space and completely re-did my ductwork with new ducting from Blastgate Company.? .? <47D8FF86-B927-4C1C-88AF-E68995E13355.jpeg> <BB80D6B0-152E-4475-8EB9-5CA72155D58B.jpeg> <043B9CBB-659D-4445-A44F-406BF9A6D649.jpeg> <3D4851FA-F2E1-4B26-9A4D-F4606C5ACBB0.jpeg> <C5BDB58B-5174-48D0-A734-BCDB626CD902.jpeg> <C567B677-0307-4CAF-A607-ABAF07252F67.jpeg>
|
Re: Kappa 400 has arrived
Congratulations.? That's a nice saw.? Your shop is beautiful.? ?Well laid out.?
Take care? John
toggle quoted message
Show quoted text
-------- Original message -------- From: "JP Rice via groups.io" <jprphotos@...> Date: 8/5/21 4:11 PM (GMT-05:00) Subject: [FOG] Kappa 400 has arrived
Well after 8 months of waiting my new Kappa 400 X-Motion to arrive I got it commissioned by FELDER yesterday. Actually had two technicians do the commissioning, one was being trained. They did a great job and I was very pleased with the outcome. A friend of mine actually received the saw at his business and brought it over to my shop last week and set it in place for me. Friends with forklifts are a wonderful thing. Really looking forward to putting it to work tonight, I have been without a saw since last Jan. when I sold my K500. I took advantage of the downtime to reconfigure my shop in preparation for this day. Upgraded the lighting, had Phase Perfect unit installed and electrical run for the saw, had floors epoxy coated, cleared out many things that took up too much floor space and completely re-did my ductwork with new ducting from Blastgate Company.? .?      
|
Re: Kappa 400 has arrived
I did not know Santa was coming early this year, I should have asked for mo
|
Re: Kappa 400 has arrived
JP,
Very nice indeed!? I am jealous, as I am still waiting on my PP to arrive.? Love the floors and your space.? Enjoy using
|
Re: Kappa 400 has arrived
That's a beautiful from every angle! Congrats! Are you sure that isn't a surgical operating room? Lol.?
On Thu, Aug 5, 2021, 3:19 PM Brian Lamb < blamb11@...> wrote: Very nice! A dream shop!
Well after 8 months of waiting my new Kappa 400 X-Motion to arrive I got it commissioned by FELDER yesterday. Actually had two technicians do the commissioning, one was being trained. They did a great job and I was very pleased with the outcome. A friend of mine actually received the saw at his business and brought it over to my shop last week and set it in place for me. Friends with forklifts are a wonderful thing. Really looking forward to putting it to work tonight, I have been without a saw since last Jan. when I sold my K500. I took advantage of the downtime to reconfigure my shop in preparation for this day. Upgraded the lighting, had Phase Perfect unit installed and electrical run for the saw, had floors epoxy coated, cleared out many things that took up too much floor space and completely re-did my ductwork with new ducting from Blastgate Company.? .? <47D8FF86-B927-4C1C-88AF-E68995E13355.jpeg><BB80D6B0-152E-4475-8EB9-5CA72155D58B.jpeg><043B9CBB-659D-4445-A44F-406BF9A6D649.jpeg><3D4851FA-F2E1-4B26-9A4D-F4606C5ACBB0.jpeg><C5BDB58B-5174-48D0-A734-BCDB626CD902.jpeg><C567B677-0307-4CAF-A607-ABAF07252F67.jpeg>
|
Re: Kappa 400 has arrived
Congratulations!! ?Great looking saw and shop.? Steve Lyde
toggle quoted message
Show quoted text
On Aug 5, 2021, at 3:15 PM, Bill Belanger <Bill@...> wrote:
? Beautiful shop!!!
Bill B¨¦langer
Well after 8 months of waiting my new Kappa 400 X-Motion to arrive I got it commissioned by FELDER yesterday. Actually had two technicians do the commissioning, one was being trained. They did a great job and I was very pleased with the outcome. A friend of
mine actually received the saw at his business and brought it over to my shop last week and set it in place for me. Friends with forklifts are a wonderful thing. Really looking forward to putting it to work tonight, I have been without a saw since last Jan.
when I sold my K500. I took advantage of the downtime to reconfigure my shop in preparation for this day. Upgraded the lighting, had Phase Perfect unit installed and electrical run for the saw, had floors epoxy coated, cleared out many things that took up
too much floor space and completely re-did my ductwork with new ducting from Blastgate Company.?
.? <47D8FF86-B927-4C1C-88AF-E68995E13355.jpeg> <BB80D6B0-152E-4475-8EB9-5CA72155D58B.jpeg> <043B9CBB-659D-4445-A44F-406BF9A6D649.jpeg> <3D4851FA-F2E1-4B26-9A4D-F4606C5ACBB0.jpeg> <C5BDB58B-5174-48D0-A734-BCDB626CD902.jpeg> <C567B677-0307-4CAF-A607-ABAF07252F67.jpeg>
|
Re: Kappa 400 has arrived
toggle quoted message
Show quoted text
Well after 8 months of waiting my new Kappa 400 X-Motion to arrive I got it commissioned by FELDER yesterday. Actually had two technicians do the commissioning, one was being trained. They did a great job and I was very pleased with the outcome. A friend of mine actually received the saw at his business and brought it over to my shop last week and set it in place for me. Friends with forklifts are a wonderful thing. Really looking forward to putting it to work tonight, I have been without a saw since last Jan. when I sold my K500. I took advantage of the downtime to reconfigure my shop in preparation for this day. Upgraded the lighting, had Phase Perfect unit installed and electrical run for the saw, had floors epoxy coated, cleared out many things that took up too much floor space and completely re-did my ductwork with new ducting from Blastgate Company.?
.?<47D8FF86-B927-4C1C-88AF-E68995E13355.jpeg><BB80D6B0-152E-4475-8EB9-5CA72155D58B.jpeg><043B9CBB-659D-4445-A44F-406BF9A6D649.jpeg><3D4851FA-F2E1-4B26-9A4D-F4606C5ACBB0.jpeg><C5BDB58B-5174-48D0-A734-BCDB626CD902.jpeg><C567B677-0307-4CAF-A607-ABAF07252F67.jpeg>
|
Re: Kappa 400 has arrived
|
|
|
|
|
|
|
4 year old phase perfect 30 hp. used for maybe 200 hours. 3000$ houston tx? prestonvinzant@...8325297388
|
i have a phase perfect 30hp i need to sell?
|
Re: 20" jointer planer format 4 dual 51
brett i will call you tomorrow it is past 10pm here. just got the post message.
|
hello all i have a 4 yr old dual 51 format 4 3 phase 10 hp for sale. asking 15k needs a little work electrical planer height electrics but was well kept and garaged in ac. 8325297388 located in houston tx. on laptop so hard to get photos you can email me or text me. prestonvinzant@....?
|
hkimsey,
I assume Felder makes most fine. If memory serves, I have seen less than a dozen complaints here of cupped jointer fences across the width over close to 20 yrs.
I know the slider on the saw is much more substantial extrusion but Felder makes them in 12¡¯ lengths per flat. It is the flattest surface in my shop. I assume that experience likely transfers to jointer fence extrusion as well.
Imran
toggle quoted message
Show quoted text
On Aug 4, 2021, at 10:48 PM, hkimsey@... wrote: ?Yes Imran, it appears to be cupped across its width. ?I¡¯m curious how many have seen this, particularly on all the new fancy bandsaw fences.
|
Yes Imran, it appears to be cupped across its width. ?I¡¯m curious how many have seen this, particularly on all the new fancy bandsaw fences.
|
I¡¯ve been suspicious of planers that don¡¯t have bed rollers but I like not having another micro adjustment to do!
|
JP Rice
PK
imran
John Renzetti
Bill Belanger