PK,
Thanks for sharing. I see felder has made some improvements or maybe AD941 always had a flat back. Looks so much better than my Dual51 circa 2011.
Impressed with the young man. Two utterances I never expected based upon my nephews. Suggestion to sweep floor and comment about machine not being straight. He is a keeper ?
Looking forward to your experience with AD941.
Imran
toggle quoted message
Show quoted text
On Feb 1, 2021, at 12:18 AM, PK <paul.kellymjc@...> wrote: ?I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
|
|
|
I took delivery Friday before last of my new AD941, so I took video from multiple angles.? So, I have the AD941 delivery and unboxing video uploaded to the YouTube channel.? I wanted to document what I learned from all of you and post it for anyone that wants to see.
PK
@pkwoodworking
|
I too like Ridge Carbide. Awesome customer service too.
Alex B.
toggle quoted message
Show quoted text
On Jan 31, 2021, at 8:29 PM, Cliff Rohrabacher, Esq. <rohrabacher@...> wrote:
?I have ridge carbide on my Bosch 12" glide It's a beast of a blade.
On 1/31/21 6:46 PM, David wrote:
rigid carbide would be another place.
|
|
|
File /Manuals & Drawings/K975 Electrical Drawings - 2006 Machine.pdf uploaded
#file-notice
The following files have been uploaded to
the Files area of the [email protected] group.
By: imranindiana
|
|
|
Imran, Can you just upload to the FOG files?
Bill B¨¦langer?
On Sun, Jan 31, 2021 at 18:20 imranindiana via <imranindiana= [email protected]> wrote: Iain, ? I had to scan at 600dpi for a clear image, so file size is large ¨C 26MB. ? Let me know if Hotmail has an issue with file size. ? Imran ? ? That is very generous of you I have that panel off where the cylinders are. ? ? On Sun, Jan 31, 2021 at 6:56 PM, imranindiana via I can send them in an hour or so but my machine is from 2006 There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
On Jan 31, 2021, at 6:33 PM, iain lowrie via <iain613@...> wrote:
? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.? ?
|
Iain, ? I had to scan at 600dpi for a clear image, so file size is large ¨C 26MB. ? Let me know if Hotmail has an issue with file size. ? Imran ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of iain lowrie via groups.io Sent: Sunday, January 31, 2021 8:10 PM To: [email protected]Subject: Re: [FOG] K 975 wiring ? That is very generous of you I have that panel off where the cylinders are. ? ? On Sun, Jan 31, 2021 at 6:56 PM, imranindiana via groups.io I can send them in an hour or so but my machine is from 2006 There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
On Jan 31, 2021, at 6:33 PM, iain lowrie via groups.io <iain613@...> wrote:
? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.? ?
|
That is very generous of you
I have that panel off where the cylinders are. There is no pouch.
My machine is from 2005.
If you would be so kind? Could you send it to SBDEZINE@...
Very much appreciated.
Thank you iain
On Sun, Jan 31, 2021 at 6:56 PM, imranindiana via groups.io <imranindiana@...> wrote: I can send them in an hour or so but my machine is from 2006.
There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
Imran?
On Jan 31, 2021, at 6:33 PM, iain lowrie via groups.io <iain613@...> wrote:
? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.?
Aaarrrgghhh
|
|
|
Annu, ? As far as Tenryu is concerned here are the options: ? Imran ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of annu.marwaha@... Sent: Sunday, January 31, 2021 6:03 PM To: [email protected]Subject: [FOG] TableSaw Blades ? Hey All,
I¡¯m in need of a 315mm blade, however the felder store is back ordered about 8 weeks. ?Any suggestions on where I can get blades for the felder bore size anywhere else?
-Annu
|
I can send them in an hour or so but my machine is from 2006.
There should be a copy in your electrical cabinet. Pouch on the inside of removable panel.
Imran?
toggle quoted message
Show quoted text
On Jan 31, 2021, at 6:33 PM, iain lowrie via groups.io <iain613@...> wrote: ? Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.?
Aaarrrgghhh
|
amazon has a few this one is well like Tenryu IW-30050CBD3
Tenryu seem to be quite popular around here.
rigid carbide would be another place.
David
|
Does anyone have the wiring diagram for the two cylinders that control the rise/fall and tilt of the main blade. The wire that comes FROM terminal #11 of the TILT control came loose from the Height adjustment cylinder.? Have not idea into which terminal it goes.?
Aaarrrgghhh
|
toggle quoted message
Show quoted text
Hey All,
I¡¯m in need of a 315mm blade, however the felder store is back ordered about 8 weeks.? Any suggestions on where I can get blades for the felder bore size anywhere else?
-Annu
|
Hey All,
I¡¯m in need of a 315mm blade, however the felder store is back ordered about 8 weeks. ?Any suggestions on where I can get blades for the felder bore size anywhere else?
-Annu
|
Stan,
Sorry, it was already bid on on eBay, so I can't take it down for a private sale. You're welcome to bid, though.
Also, if one of you Foggers wants to purchase it from outside the US & you win the eBay bid, we can work out the shipping on the outside of the bay.?
https://www.ebay.com/itm/The-Unofficial-Survival-Guide-to-Felder-Sliding-Table-Saws-Like-new/324469180958
Rod
|
Re: Ten woodworking tools you have to see
I went ahead with the preorder offer on the Multirouter inspired by the tilting table and the hope to be able to reasonably record setup information to recreate (chair specific) joinery.? I have a Stanfield horizontal mortiser I bought for the same purpose (which works as advertised) but, in my experience, each setup is unique and hard to replicate.
Between all the other hand held and fixed joinery machinery I¡¯ve got (including chisels), about my only rationale for anything new is being able to efficiently and accurately accomplish (and repeat) that compound angle scenario.
On Sun, Jan 31, 2021 at 7:44 AM Cliff Rohrabacher, Esq. < rohrabacher@...> wrote:
Michael
Look closely? at the bearings in the joints of the machines.?
I've never been in the presence of a pantorouter.? but looking
at? vids and images I believe the pin bearings on the? pantograph
arms? are little other than steel pins in slip fit aluminum
holes.? If this is so then it's a terrible? bearing that will
produce? immense wear and slop in short order.? But Like I( said
I've never been in a room with one so? I? really can't say what
exactly? it is.? Maybe they have ball bearings hidden in there? or
bronze bushings.?
If I were abut to spend the $$ I''d e want that question
answered.
The Multirouter OTOH? has? linear slides and that technology? is
well probven and the thing is not made of? cheesy? aluminum
extrusion held together by? little bolts
On 1/5/21 9:40 AM, Michael Marsico
wrote:
I see woodpeckers has a sale on the multi router from an email
today.? ?So i thought I would revive this thread.? I was leaning
toward a panto-router and wanted to ask if anyone had used both
and what the set up was like.? I see David's comments on the
multi-router which, as always, makes a lot of sense.? With the
Pantorouter you move the router with the wood being clamped in one
position and with the multi-router you move the work piece and
tables to and around the router.? Does one of these methods make
set up quicker and easier or is it "6 one 1/2 dozen the other"?
|
Re: Ten woodworking tools you have to see
Why not make them from plastic On 1/31/21 2:58 PM, Philip Davidson wrote: With the Multirouter you could with metal Why not make them from plastic??? I mean? that the multirouter people? do does not mean that you must.? Alum? is more durable and that's prolly? why they use? it? but? still plastic or wood should do just fine
|
imran
Joe Jensen
PK
Bill Belanger
David