开云体育

Leo: Re. availability of wood in Texas. I have been looking for quartersawn wood in Houston and the only thing I can find is oak (usually red or white). Is there any quarter or rift-sawn cherry or

Geoff, thanks for the great hospitality on Sat., I really enjoyed meeting you and seeing your shop set-up. Also, thanks for the info about the web page. As soon as I have read all the new

Leo: Just remember one thing,,,,, REAL MEN CUT VIRGIN - - IA WOOD. Rick Strom Virginia Operation

Hi Jason: I can't add much to what Rick, John, and Joe have said about your options dilemma. I can say that the 8' slider makes that crucial jump in length giving you the travel needed to handle an 8

Rod, Go to the web site, and on the left-hand side there is a list of categories. The second item from the top should be "Subscribe." Since you are already subscribed, this will let you set your

I agree with John about buying the new KF700S machine instead of the KF7F demo machine. The new machine sells for something like $9390, which as John mentioned is about what they are asking for the

Hello Jason Being about to buy a Felder myself, I'm having similar choicing problems. I am looking at the BF6-31 with outrigger, long sliding table & all the gadgets or for a very similar price the

-Hi Jason, And right on Rick's cue, here I am. This is what pilots do when they are not flying. I have the KF7F that is about the same as the demo model being offered. Mine does have the

Hi Jason: Welcome to the group. Like you, I am also "reviewing" the options categories. Still undecided as to what options are not only necessary, but for the money, are wanted. I view this to be

Hi Anthony, Something I didn't explain before you signed up was that when someone posts a message everyone in the group gets it. You can change this preference and get messages via a daily digest

Hi Group, I'm new here, and this is my first posting. I'm not a Felder owner yet, but plan to be soon. I figured I'd hang out here with you folks to learn a bit more about the machines, and maybe you

Hello Rod I got your message to Geoff! Anthony

Hi Geoff, When I checked my personal e-mail this evening, I found that I had over 100 Felder egroup messages. Could you please suggest a way that I can turn off all messages from being forwarded

Geoff, As it turns out I am either blind or I was having a senior moment, I found it. Rich wrote: site

Richard - are you refering to your e-mail program or the web site (hosted by eGroups). eGroups made some major changes to the web site over the weekend, so things might have been moved around a

Charlie, I bought my 5" Flex hose form McMaster-Carr out of California and even though I have no experience with Felder hose I just can't imagine it being that much better than the hose I have.

I also used standard 5" CVD flex hose to hook up to my Jointer/Planer and Table saw connection with the Felder quick connect right angle. 5 inch is a little bigger than the 120mm nominal diameter of

Group, When I bought my AF-22 LN dust collector I used 5 inch flexible hose instead of the metric size that Felder sells because of the difference in cost. I am now ready to hook up my DC to the

I use the Felder hose. While admittedly expensive it's really great stuff and I'd recommend to anyone. It's very flexible, and I move it around my machine from port to port as required. I just

Chuck- I have read your previous posting regarding your mortise bit situation. It seems as though the rotation of the mortise bit is conflicting with the grain of your workpiece. If you are using