开云体育

When I was young, I would go out to restaurants with my father, and he would hold up the little lights commonly found on restaurant tables so as to better illuminate the menu.? I never fully

In-cabinet lighting can really elevate a piece. Some clients really like it. I have installed it in the past and it makes a big difference especially in display pieces. Here's a link to Hafele

My Hammer C3-31 was a floor model and it had a vibration which grossly affected the cut quality, especially with veneer plywoods. A friend/fellow woodworker suggested a blade dampener, so I ordered

I assume these blades used to cut fine and you have them both sharpened, so my first thought would be to try another blade and see what happens. Moving on, you are xcutting material clamped to the

I would try running the blade at full height so the cutting action is down instead of horizontal Bill Belanger

Hi have a resharpened Leitz and Felder 96 tooth ATB blades on the saw and it’s leaving some ripples on the end grain cuts. Arbor is clean, no dust particles between it and blades and blades sound

Timothy, I have a couple extra Felder table extensions (1000mmx150mm - part No. 400-104) that come with the 300mm F-coupling. If interested you can message me directly. Troy 503-869-5668

I appreciate the suggestions, fellows. I will give the KV slides a try. Maybe not the 500-pound slides at $140 per pair, but the model 8500 look interesting. Thanks to all of you for your suggestions.

I use KV 8908 as well. My supplier is Wurth Louis - they have a branch near you in Boise and worth setting up an account if you don’t already have one. They have good pricing and will ship to the

You guys have confirmed my thought on them. Seem difficult to implement and not much value. Thank you. -- Stan Blaszczyk Causal Maker of Stuff Cincinnati, OH

I used KV8400 in shop slides. Drawers contain heavy tooling and multiple shaper spindles. No issues. Imran Malik IAM Wood Creations https://www.facebook.com/groups/362481112015700/?ref=share

I have Fulterer brand in my shop and they work great. I think Fulterer is a German company but the slides are made in Taiwan. They've been a good balance between cost and performance. I have a mix of

KV 8908s with lock in/outs. Load rating 200-500 lbs. great for shops and for pack outs. [email protected]> wrote:

Rock On Mac! Thank you for sharing that gem Brian K O'Brien [email protected]> wrote:

I agree with KV, they seem smoother than the Accuride and have worked well for me. Brian Lambblamb11@...

John, I used KV heavy duty slides in my shop. 13 plus years and still going strong. Thx, Wade

I also use davinci resolve. I like that the pro version is a one time fee instead of a subscription, and it's an all-in-one software suite. For recording, I upgraded to a crane jib and love it. --

I am putting together another bank of drawers for my shop, and am looking for recommendations for drawer slides. Boxes are 35” wide, and will carry both heavy and light loads. I’m the past I have

Rohit, I use DaVinci Resolve 19.? It is pretty powerful, one time charge and updates pretty frequently.? If you have a powerful PC and a graphics card, it can use the acceleration. It can do almost

Sorry the sticker post was supposed to go to a private person. Sorry for the post. Mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell