开云体育

Yes they are. PK

Nice Elu feeder in the picture Mac. My favorite feeder.

FYI Unit was built with 700 series Felder horizontal gray post the rest of it. I’m manufactured myself. The horizontal column is lined with HUMW vertical post is 6 x 6 tubular steel has jacks on the

Hey Denno...congrats on the new tool!? Not sure if this helps, but the video below show the installation of the overhead saw guard unit with some nice closeups that may help in determining dimensions

The blade on Amazon looks like it’s already punched for Felder brake. True? - thx

Hi Philip, I don’t like to shoot in the dark but what Steve mentioned is a distinct possibility. I do not have much experience with Hammer but Felder designs commonly use an overload relay with an

I forgot to mention that you may also want to check for any loose electrical connections since you have had vibration issues.? This could also cause tripping of thermal overloads. Steve

I suspect thermal overload settings are still set for 2.2kw motors instead of the 3kw motors.? The thermal overload settings can be adjusted and I would talk to Felder about where those are on your

Thank you Mac and Rusty for your perspective. This is what I was looking for. I always like to explore ideas and concepts and am, at the same time, mindful of skill sets, knowledge and equipment

Denno, Mac's answer to "how long did it take?" is right on point. ? ?I'm sure that I had that project brewing in the back of my mind for several weeks before I started collecting materials and

I have been very happy with the Forrest blades I have and they have done a bang up job of sharpening the Felder blades too.

Philip, What do you mean by “after 5-10 minutes with he table saw on the power switch flips” On felder, no on/off switches flip on their own. Do you mean that the saw just turns off? If not a

*I have a 2002 Hammer C3-31 combo machine and it was a floor model and wasnt able to try it out till I rented a truck and a 2 ton fork lift and get it in my shop. When I did I discovered it was very

Hi Denno When looking for blades for my Felder saw, I found Freud must make a lot of the blades for Felder. Some seemed to be the same spec or so close that it made no difference (to me at least, as

Howdy folks. I’m preparing to downgrade my 49” k700s to 31”. I ordered a table and bar, but the guard holder is more expensive than the entire guard assembly on the Felder Shop, which isn’t

JacquesIt’s a good way to get your hands dirty that’s for sure. Rusty obviously has numerous skills in Metal working and other skills One finding the materials developing a design ability to cut

Mac, Valid question. In my case, I like to learn new things and new skills and having an idea of the scope of the project is helpful.?

Ridge Carbide makes a decent blade, as well as the others mentioned above..... https://ridgecarbidetool.com/collections/table-saw-blades

I also use the 300mm Tenryu

I am out from my shop this week, if you need measurements I can provide them next week. Regarding shipment, you can ask Felder to ship the item to the nearest warehouse for a free pickup (Anaheim in