|
Re: Hammer zero clearance insert
¿ªÔÆÌåÓýHi Derek, that¡¯s beautifully done! Thanks for sharing. ? Warm regards, Lucky ? From:
[email protected] <[email protected]> on behalf of Derek Cohen via groups.io <derekcohen@...> A couple more photos. ? ? ? ? |
|
Re: DRO for Powermatic / Northstate 1632 Open End Belt Sander?
¿ªÔÆÌåÓýAccurate Technologies stuff is great! ? Wade ? ? ? Sent from for Windows ? From: PK
Sent: Saturday, November 2, 2024 1:47 PM To: [email protected] Subject: Re: [FOG] DRO for Powermatic / Northstate 1632 Open End Belt Sander? ? John, ? My friend and brother both have one of these sanders and both came with DRO's from Powermatic.? They are Accurate Technologies brand. ? ? Not the cheapest, but I put one on a double drum sander I had and I liked it. ? PK ? |
|
Re: DRO for Powermatic / Northstate 1632 Open End Belt Sander?
¿ªÔÆÌåÓýJohn,The Northstate and Powermatic 1632 WB machines are identical except for the paint and badging. ? Yes, I have installed a Wixly DRO. ?Photos of the install below. ?It works fine but it is crude/cheap and I don¡¯t especially like the method of calibrating it (download the manual and read it before you buy). ?I would recommend the Accurate if you can spend the bucks (same comment about reading manual first). ?I posted some info on adjusting the slewing of the upper control roller that determines the belt tracking limits and rate of change here: ?https://flic.kr/s/aHskkF1CTX ? If you ever need a new feed belt or graphite cloth for the platen, I recommend you call Greg Leneave: ??(800) 442-2302?. ?Excellent service. Others have asked me in DM¡¯s about how to eliminate snipe with this sander. ?Here is how I reply: I have owned the Northstate Widebelt sander you have for over 20 years now and gotten great service out of it. ?I even posted some videos a long time back on how to adjust the belt tracking, and you¡¯ll find some posts in the archive about the platen and how to replace the graphite cloth. ?The snipe issue you are having is the result of the board coming free from the downfeed pressure roller on the infeed side as the board finishes the final 4-inches of travel. ?There are three things you can do to reduce and often eliminate trailing edge snipe:
David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best
|
|
DRO for Powermatic / Northstate 1632 Open End Belt Sander?
I just purchased a Powermatic 1632 open end sander. ?Looks like the same machine as the Northstate. ?I am assuming the Wixey DRO would be an easy install? Has anyone put a DRO on their Northstate / Powermatic? ?Any downside to doing this ?
?
|
|
Re: Crosscut fence stop for sale
¿ªÔÆÌåÓýJames,Our msgs probably just crossed. The pic I shared shows the size difference. I jumped because it is beautiful. Imran Malik On Nov 2, 2024, at 10:02?AM, James Zhu via groups.io <james.zhu2@...> wrote:
? Imran, Most likely, it does not fit the standard xcut fence.? Btw, Felder eshop has the less beefy xcut fence stop for $102.?? James On Sat, Nov 2, 2024 at 9:55?AM imranindiana via <imranindiana=[email protected]> wrote:
|
|
Re: Crosscut fence stop for sale
¿ªÔÆÌåÓýHi James,Saw the video. It is much biggger than std stop as shown below. I will pass as my DRO won¡¯t fit. Imran Malik On Nov 2, 2024, at 9:55?AM, Imran Malik <imranindiana@...> wrote:
?James, if it fits std xcut fence, I will take it. Imran Malik On Nov 2, 2024, at 9:51?AM, James Zhu via groups.io <james.zhu2@...> wrote: ? I have an extra crosscut fence stop (never used) for my KF700sp, perfect square. See attached pictures. $140 plus shipping.
The list price on Felder eshop is $331 James <IMG_5049.JPEG> <IMG_5048.JPEG> <IMG_5050.JPEG> |
|
Re: Crosscut fence stop for sale
¿ªÔÆÌåÓýJames, if it fits std xcut fence, I will take it.Imran Malik On Nov 2, 2024, at 9:51?AM, James Zhu via groups.io <james.zhu2@...> wrote:
? I have an extra crosscut fence stop (never used) for my KF700sp, perfect square. See attached pictures. $140 plus shipping.
The list price on Felder eshop is $331 James <IMG_5049.JPEG> <IMG_5048.JPEG> <IMG_5050.JPEG> |
|
Re: OT: What totally unexpected things you have found in the shop
Story about carpenter bees. Our family moved from California to rural Australia in 1964. In 1968/9 my parents built a Cape Cod styled house from plans published in Better Homes and Gardens in the 50's. It was constructed with Douglas fir framing with Western Red Cedar 2x6 ceilings shiplap siding and shake roof. All imported from California. I was visiting in the mid 1980's and, on looking up at the Cedar cathedral ceiling, noticed lots of tiny pin holes of light like twinkling stars On investigation, there were circular holes in the end on many of the shakes on the roof. In many cases the holes had gone completely through three layers of shakes and 2"of solid Cedar.?? We called in the CSIRO (Commonwealth Scientific Investigative Research Organisation).? After a week of checking they came up with carpenter bees as the culprit. Possibly imported from the U. S. with the timber (although already present in other parts of Australia).? The house was fumigated and then a new shake roof was layered over the old one. My granddaughter wandering around the back of the house.? Happy election week guys. (Kidding). Uncle Clint. On Fri, 1 Nov 2024, 6:07?am Philip Snyder via , <pswoodworking=[email protected]> wrote: Tim Ruth, |
|
Re: Hammer zero clearance insert
¿ªÔÆÌåÓýI think he wants to know if your product is compatible with the Minimax SC4 Elite¡Bill Belanger Frenchman con un poco Espaniol in Arizona¡ :)? On Nov 1, 2024, at 12:57, Wade Dees via groups.io <wjdsignature@...> wrote:
|
David Luckensmeyer
David P. Best
PK
imran
Bill Belanger