开云体育

SOLD pending shipment and funds These are an unused pair that I purchased around the time I bought my K700S in 2019 but never used. $1000 + shipping ?for the pair. Please email me at jonfsnider at

Thank you Imran, I cleaned the tracks with WD-40 and wiped off with only minor black marks coming off on the towel. Yet that was the culprit. Saw works great. Thank you! Regards, Peter

I think you would be better of placing the PP next to the outlet you have and run an extension cord from the PP using a SOOW cord. 10/4 for up to 30A (24A for continuous load), so should be good for

I should add that the circuit should be used at 80% of its design. So, even though, you 30A single ph can support 16.6A, it really should be limited to 13.2A steady state. Imran

?Hi Matt, As David mentioned you need higher single phase current. Actual conversion factor between 3ph and single phase current is 1.732. This assumes no losses, for this reason PP recommends 1.8

Hey steve, in my experience I have not had any issues with getting parts through Felder. The techs are always very helpful!!

I have been looking at BF631's and have tried to get Felder USA to obtain from Austria a list of discontinued parts for the machine to no avail. ?I discovered that no parts are stockpiled in the

The PT330 needs 60-70 single phase 220 v amps to supply 30+ three phase amps. Will the K945 run off 15-17 three phase amps? Dave ________________________________ Sent: Saturday, June 8, 2024 6:14

The PP is a PT330 so it could supply up to 30A.? As I'll only run one machine at a time, I have it running off of a 30A 220V breaker.? I ordered the machine about a year ago and knew the PT330 will

How much amp draw on the three phase machine? I have a spare PP that is mobile but keep in mind you can only run about 9-11 three phase amps from a 20 amp 220 recepticle. My spare runs into a 50 amp

I've seen picture of people mounting rotatory phase converters onto dollies so they can easily move them around their shop.? I don't currently have three phase in my shop but I'm about to receive my

Thanks David, good to be back.? Glad your still on the FOG!? I retired end of October so now I'll be spending a lot more time in the shop.? Much appreciate the detailed info and specific links

Mac, that's a very impressive piece of construction. Standing seam roots are not common in Australia, however it turns out that the only roofer I could find that has any interest in my job does do

Hi Peter, Someone literally posted this issue few days ago. Suggest reading this thread and get back with us. Sliding Table Saw Shutting Itself Off groups.io Imran

Hello, My CF 741 S starts fine and then when I move the slider it turns off. Seems like I am missing something basic? Hopefully someone has experienced the same thing. Regards, Peter

Hi Ron, it’s been a while. Nice to see you are still woodworking and tuning in here. I too am a fan of simple profiles, favoring Shaker style as the inspiration. For the two projects you called

I also have the Lenox Woodmaster CT, 25mm and it is great blade. I haven’t tried to replace the tension spring, but my saw claims it can tension 25mm blade vs the like you shared that is up to 20mm

Located in Cleveland Ohio, Asking $5000.? Tons of extras!!!? Call or Text 440-390-0814

Used Hammer N4400 - Further update; After trying several blades with variously underwhelming results we ended up getting a Lenox 1" CT Woodmaster blade from a supplier in the Netherlands. We also

Whitehill tools adjustable cutters. https://www.whitehill-tools.com/cutter-heads/kitchen-door-sets/ I have both shaker and profile sets. Zero set feature is amazing for production