开云体育

Good day. I'm a semi-retired physician in Victoria, Tx with a KF 700 I purchased new in 2015. My problem is finding the way to replace the drive belt for my scoring blade. I recently found it in the

Hi all, Any preference to truing up the main roller? I haven't done it before,? but one option was full width abrasive glued to MDF.? The other is to place a narrower strip on a diagonal.? ?Third

Hi Roger, I looked at your video on Instagram. Here are my comments/suggestions: For best results, your machine should be on adjustable leveling feet instead of using shims under the base. The

JP, Is there an airbnb for workshops? If not, there should be one. A week in your shop sounds really good. Imran

All, As best I can match it under 3 different light sources RAL 6016 Turquoise Green with about a 30 % matt finish. Hopefully this will prove useful to others. Regards Paul

Roger, welcome to the group. I am not the guy to give advice on adjustments but David Best definitely is as well as Brian Lamb, Imran and many others here. As to the shim method I would buy adjusting

Roger, Is there another way for you to share video? Don’t do instagram and can’t login with facebook because acc to them I do not know my username. Imran On Dec 29, 2021, at 6:06 AM, Roger Martini

Sent you text if you're still looking for info.? Here's one of the videos I did on the process..... https://www.youtube.com/watch?v=_0e3Tde6whs&t=21s

Hi everyone, I’m new to the group, but am pleased to have been directed here recently by David Best. I watched his video on adjusting the slider on his table saw on his YouTube channel, which

All, Thanks for the responses I have a Ral colour chart now and will post which ever colour is the best match later in the day. Regards Paul ________________________________ Sent: 29 December 2021

Is there a small piece with that color on it that you could take to Lowes or a paint store to be analyzed? Bill Belanger

Sadly for the 6 series the color code is "special color".

I recently made a crazy horse dolly and it is absolutely incredible! I moved a couple 5'x10' MDF sheets and positioned them on the saw by myself with no issues. I agree that you'll probably want both

Dave, You’ll want both. And a Barth 500V. David Best https://www.flickr.com/photos/davidpbest/albums https://www.instagram.com/davidpbest/

On my? 2000ish AD 741, I turn the knob to raise the outfeed table to about .002 below the top of arc of the cutter head, then lock it in position.? HTH. Jason

It was very involved, and I couldn't find any info from others who had made the swap.? They're not great videos, but I did post two videos of the process on Youtube.? If you search: Byrd AD741

Hi Dave, I have the 5’expanded version I put rotating wheels on all 4 corners. Also modified the catch so it also faces down and out of the way. Also made a few simple adapters so I can use for

Jason, how difficult was it to install the head?

Hi Paul, I've installed a Byrd head in my circa 2000 AD741 combo machine and still have the original 4 knife head that uses the Felder system quick change disposable knives (not Tersa).? I'm open to

The CHD isn't on his website but I emailed him directly and he said he had a few available now and would be getting more ready to ship the beginning of next year. Dave Davies wrote: