开云体育

HAHA..nice try.. my AD941 wont be at the show after all.. BOOOO!! LOL

For good measure, here is the link to basic checkup steps David B has on Flickr. Never hurts to check table flatness and table relationship to blade. There is also a helpful sketch of cause/effect for

Drew there is no nice way to say this. The jointer requires skill of the operator and new folks don’t have it! Sharp knives and practice practice practice and after 10 years you may get a handle

Jointing a board only affects one face.? Getting a tapered board upon repeated jointing is a not-uncommon occurrence.? But if you think about it, it makes sense.? The jointer's job isn't to achieve

Nice! I see you listed the Aigner jointer fence on your wish list. Do you have other Aigner accessories? I ask because there’s quite a bit on the list that you might prefer to have… pressure

Bob, Thanks a lot! Your design is interesting as well. If you can omit the hinge at the ceiling and fix the arm at your platform, that could be quite advantageous for reducing flex. The hinge at the

Lucky, I am in the process of upgrading my machines to make them more comfortable and safer to use.?I do not yet have Mac's clamps, but they are on my list of machine upgrades planned for the near

Thanks. I'm just amazed at how much the filters cost. Dave -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

This was due to the machine being purchased from someone that purchased the machine through an auction- I believe the company went under while someone was doing a filter change and the trays were most

Where are you Randy. Just finished inscribing my name on your AD941. Imran

Hi Drew Do you get the same result by doing it without the PF? I've not had the PF on my thicknesses/planer. At one stage I had a similar problem and found the fence although square to the table was

I just received an e-mail from Felder. Apparently my jointer (A9-41) is scheduled to arrive in the USA in April 2022. My wife said “I hope you are still alive then.” ?

Nice shop JP ? Imran

Michael -? That is brilliant!? It looks like it would be extremely stable, and also easily adjustable.? I have a C3 41, so I just may have to follow your lead with this.? Thanks for sharing! Bob

Michael, that's a beautiful design!? I've been modeling something for my Hammer C3 that's similar, but I may need to incorporate some of your ideas. Joe Kurtz, there are several places to buy

Felder cf531 professional for sale in Phoenix AZ with Felder af22 dust collectors for $4000!!!!! ?Either check Craigslist or message me and I will forward the sellers number

I would sell my virutex if anyone was interested ? I have it stored in a festool systainer which fits perfectly. ? I would take $500 for it. Private message me if anyone is interested

I have had the Virutex?lipping planer for decades and am very happy with it- I use it professionally. Indexed, double sided disposable blades.? The current model number is ce53s- $700 at

Hi Michael: Exactly what I had hoped — that you could swing it out of the way completely. The fact that you have 30cm of clearance is not to be sneezed at. I don’t know if you have Mac’s clamps

Thanks, Lucky! If fully moved up, there is about 30cm clearance below the hood. In principle, one could increase this by another 10-20cm by shortening the aluminium bars, without loosing sturdiness.