开云体育

Sharing my recent shipping story - I just took delivery of my CF531 and was given the spiel by my sales rep about inspecting for shipping damage, etc. When the crate arrived, it was in perfect

I originally was going to get the 931 I think it was, and comparing the 931 to the 941, the build was better, table easier to lift and it was 1k more at that time. I am not sure if the 951 was out yet

David Kumm- have I ever been there!! ?If I get an electric jack I will remember that tip until I say “I bet David’s gravel wasn’t compacted quite as hard as mine. ?I can definitely move this

Bond Performance, bond? I accidentally left the world *bond* out?? you can also call it a surety bond.

Call your? insurance agent? and ask about?? a rider? or performance and to cover shipping and delivery.? This is normal stuff for the industry

Also don’t forget to add 1k for commissioning unless you like rolling the dice or at least comfortable with making your own adjustments. Also jumping to the 951 is like $3500 min and 3p only...

capacitors are cheap,? replace them.? I'd? had good luck replacing cheap parts? as the go to fix-it method? over the years when ever I'm in over? my head.

When I was considering the 941-951 my salesman told me I didn’t need the 951. So for some people it might be overkill. Just sayin... Bill Belanger wrote:

joe said, he did that procedure before he purchased profil. imran

hi Joe Thought Profil45 has everything automated and controlled via a control panel, why would you need the fencing measuring device?

If you need an AD941 then you might as well get the 951. 951 is alot more machine than 941. I was in similar situation 2 years ago and I went with 951, silent cutter etc. never looked back.

Sorry, I forgot to mention that the capacitors must be removed from circuit if you are testing the capacitance using a multimeter as you may be measuring multiple capacitors and/or other components

It may still be bad capacitors. Just because the capacitance is good, they still need to be checked for ESR and leakage. Google these parameters and you will find the explanations. Hope this helps.

Anthony, I’ve been using the Fireball squares for a couple of years now and love them. When Mac Campshure was here visiting last time, we stood over my bulkhead entrance to the basement and jawboned

Anthony, If you need a lathe for your new shop I have a like new Grizzly G0694. Since you’re in Maine too it should be an easy delivery... Bill Belanger

Hi Sam I’m basing this on a looksie of the Hammer C3-31 single phase circuitry but the thing is that the run and start capacitors are shared between the motors. IE there is just the one set of

They are very similar. Jatoba is shown on the left, massaranduba is in the right

An electric jack won't go more than a few inches in hard gravel so don't even try to take it off concrete. I spent an hour making that mistake last week. Tried to save 5 minutes. No cure for dumb.

It’s most like Ipe. In fact, if I put an Ipe board in a field of massaranduba you wouldn’t be able to pick the ipe.

A little of both. I saw a tree design in a chair and modified it to a bed.