开云体育

Joel, Did you get the auto drool scrubber option on those machines? Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612.432.2765

You mean this? Variable blade tracking angle - a design flaw flic.kr David Best - via mobile phone

Laguna saws manufactured by ACM have had this issue for years. I don’t think there is a fix. D Sent from my iEye

Hullo out there. I have a new N4400 bandsaw. The upper blade guide is misaligned and travels off vertical (deflecting the blade); the adjustment is very stiff; and tightening the locking knob deflects

I wonder if someone can advise me. My new K3 slider is giving me a 1mm bowed cut over 1800mm length. Is this normal? Is there a calibration procedure for this? Cheers --- Daniel Day Kitchener,

I had riving knife misalignment on my new K3 also, I double-side taped some pop can shims to the back of the mounting block. That way the riving knife just slides into position easily and no risk of

http://hotknives.com https://rangate.com/products/corrugated-knife-shaper-cutter Corrugated shaper cutter tooling from Rangate. ?Knives from the company "Hotknives" as shown yellow arrow in the

Joelgelman, Nice looking doors! What are “hot knives”? Thx, Wade

As an option to consider - Great Lakes. ?I wanted a custom profile for cope-stick cuts for rails and stiles for a kitchen project and other projects. ?I purchased the knives-backers so that I could

sure

Message sent. Please let me know if it hasn’t arrived as I’m new to the private message feature. :)

The corrugated option can be less fussy as the radial movement is locked in with the corrugations pretty accurately and you only have to worry about the up and down or axial positioning for your fit.

I use W. Moore Profiles for corrugated backed custom knives in my Schmidt cutterhead. I've had multiple profile/counter profile door sets made and they've always fit very well with no fussing. If you

Dan, it's good to have a variety of options if possible because you don't want to be forced away from a job for lack of suitable tooling.? For example, a friend had a bad puppy experience and needed

I too have used Infinity for a variety of items, mostly router bits, with excellent results. I have not used them for shaper tooling. For shaper tooling, I have used Rangate exclusively. It is true,

I have a couple of the Whitehill limiter heads and like them for profiles that I don’t use often. They are a step up from the three hole euro heads. However I do not care for the Whitehill heads for

If by the combi head, you mean the combination limiter / rabbit head that Whitehill sells, then it would be a great option if you didn't already have a rabbiting head, otherwise a simple limiter block

hotknives.com for custom-made corrugated knives. Obviously a google search will give you plenty of worthy options. Contacting colonial saw to see who is operating sharpening/grinding equipment they

Rangate. Love their stuff. *Drew Tosh* *Designer / Owner* *WOODWERD, LLC.* *woodwerd.com <http://woodwerd.com>* 2120 W Braker Ln Suite G Austin, TX 78758 *Main: 512-553-9663* *Mobile: 512-971-7406*