开云体育

Hi Dan! It's possible that might be for the outrigger support arm to prevent it from overextending. -- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN

Maybe for the outrigger support so it doesn’t come flying off… Regards, Mark https://www.instagram.com/kessler_woodworks/

Hi all, I’ve had my K700s setup for a couple weeks now and can’t figure out what this extra bolt with two nuts is for. It came in the packaging bag for the sliding table push button handle.

That’s nice! Easier than me with a cutting wheel in my grinder on my spiral duct. Brian Lamb blamb11@... www.lambtoolworks.com

There are many options for inhalation - just get the one that fits best. For me, the 3M cartridge type half mask works well. (Used them for years in an operating nuclear plant)! We also had full face

The 3M Versaflo is amazing. We purchased it for my wife’s work in spring 2020 for obvious reasons. After she received her vaccination, I bought the versaflo off her for my time in the shop. One,

Trying to abbreviate my search. I’ve got a lot of milling to do (massive amount of walnut) and want to find a full face respirator. ?A web search lands me on a few options but would like the

Hi Imran, They are definitely way better performing machines as well, and the shaper is an added bonus to my setup. I think the clamps look great. The gentleman I bought the saw from had the manual

Hi Tyler, Welcome to the group. Glad you like them clamps. I had them made in Kokomo, IN. The white base tells me that it is one of the few early ones that did not get my 2 hr manual RO sanding, so

Hi , new to the forum and new to owning Felder tools. My shop is pretty small 10’x20’. I actually have more space now than I did with my cabinet saw , jointer and planer. My A3 is missing a couple

And PVC duct work. :-) [image: 20220306_141501.jpg]

Hey Rob, Yep, sent Felder this video. There’s a flat spot in it. I’m going to search for a same size wheel, but something with a nylon material.

Nice job on the retro and sounds like you got a good deal! Brian Lamb blamb11@... www.lambtoolworks.com

Wade, My fence does not have that bounce. I get a knock when going over the transition from stamped sheet metal to cast iron, and I drag on the table, but not the bang-bang-bang in your video. It

That is a Kysor Johnson model J that I did a full teardown, repaint, rebuild on. Took me a few months of chipping away at it, but it came out great. It is a very nice saw. Bought it for $400.

Nice! What a big space, looks great! Looks like a Kysor Johnson band saw in the back ground…. nice machine for metal work. Brian Lamb blamb11@... www.lambtoolworks.com

Thanks for indulging me, as I'm excited to have gotten this mostly done. Thanks to the folks on the list for the advice on leveling and adjustments, esp Brian and David. The possible thing of interest

UHMW, you can get it online from Plastic Supply houses or places like McMaster or MSC. That is a good solution, and watching your video, the wheel is obviously out of round and when it hits the low

Hi Rob, What is that inserted material I’m looking at? I did find a flat spot on my wheel. Felder is still “reviewing” my video. I was thinking maybe there’s an aftermarket wheel that is made

Just a picture of what the roller looked like and my fix to smooth out the travel of the fence from the cast to the steel extension table. Felder did send me a new wheel but still was not that great.