开云体育

Trying to abbreviate my search. I’ve got a lot of milling to do (massive amount of walnut) and want to find a full face respirator. ?A web search lands me on a few options but would like the

Hi Imran, They are definitely way better performing machines as well, and the shaper is an added bonus to my setup. I think the clamps look great. The gentleman I bought the saw from had the manual

Hi Tyler, Welcome to the group. Glad you like them clamps. I had them made in Kokomo, IN. The white base tells me that it is one of the few early ones that did not get my 2 hr manual RO sanding, so

Hi , new to the forum and new to owning Felder tools. My shop is pretty small 10’x20’. I actually have more space now than I did with my cabinet saw , jointer and planer. My A3 is missing a couple

And PVC duct work. :-) [image: 20220306_141501.jpg]

Hey Rob, Yep, sent Felder this video. There’s a flat spot in it. I’m going to search for a same size wheel, but something with a nylon material.

Nice job on the retro and sounds like you got a good deal! Brian Lamb blamb11@... www.lambtoolworks.com

Wade, My fence does not have that bounce. I get a knock when going over the transition from stamped sheet metal to cast iron, and I drag on the table, but not the bang-bang-bang in your video. It

That is a Kysor Johnson model J that I did a full teardown, repaint, rebuild on. Took me a few months of chipping away at it, but it came out great. It is a very nice saw. Bought it for $400.

Nice! What a big space, looks great! Looks like a Kysor Johnson band saw in the back ground…. nice machine for metal work. Brian Lamb blamb11@... www.lambtoolworks.com

Thanks for indulging me, as I'm excited to have gotten this mostly done. Thanks to the folks on the list for the advice on leveling and adjustments, esp Brian and David. The possible thing of interest

UHMW, you can get it online from Plastic Supply houses or places like McMaster or MSC. That is a good solution, and watching your video, the wheel is obviously out of round and when it hits the low

Hi Rob, What is that inserted material I’m looking at? I did find a flat spot on my wheel. Felder is still “reviewing” my video. I was thinking maybe there’s an aftermarket wheel that is made

Just a picture of what the roller looked like and my fix to smooth out the travel of the fence from the cast to the steel extension table. Felder did send me a new wheel but still was not that great.

Glad to hear that worked!

Wade my Hammer K3 made this noise and it is the roller wheel under the cast housing that holds the fence. Flip it over and check that roller

Hey Steve, I contacted Chuck, over at GrnGate. He made up a new, longer, sensor cable so that I could route this into the saw cabinet. I connected it right to the power cable going directly to the

? Hi John, When you get a chance, can you view this video. I’m curious if your rip fence does this when you slide it across the table? Mine has a real bad bounce to it. Make sure you have your

John, you aren’t likely to find the square I have - I bought up the last 10 units in the US several years ago for fellow FOG members. Since then I haven’t seen the Polish version available. At

David, thanks for that very helpful response. What is the brand of your square? I cannot quite make it out in the photo, and have not yet been able to find that style larger than 200 x 300 mm. 200 x