开云体育

What is your name? Why don’t you people sign your posts? There are tons of posts in the archive about saw blade preferences. Search prior posts please. David Best

The red bolt sets the tension on the ball bearing the Prolock, it is adjusted at th factory and should not be turned. This is what the Owner of Prolock told me at LIGNA when we bought a batch of pro

Sold for $50 plus shipping.

I've been riding the Felder combo blade quote happily but decided next sharpening it's getting swapped out by the recommendations of many here - the Tenryu 300mm class of blades. I haven't put them on

This may work in some cases, but not if one or both circuits are GFCIs, and you create an unsafe situation where if one plug is unplugged, the unplugged male plug can have live voltage.

Tom I don’t know if any one mentioned this but if you have a 240 unit you can make a 240 outlet and power it wit two 120 plugs . Plug your saw into it for 240. Mac,,, martin/campshure/co/llc mac

Hi Folks, It's been decades since I last posted on a Felder group. Regretting yet another cumbersome shop move, with great remorse, I sold my Felder K700. Since then, I set up a new small home shop,

A heads up on using a 120-240 VFD:? they most often do not work with a GFI outlet.?? The GFI incorrectly thinks that there is a leakage and will trip as soon as you start a motor.?? I'm not sure

Yes I did check that. I have to check continuity, as was mentioned. I have to stare at it all for a bit and see the pattern first. Tomorrow I hope.

This happen all the time with me. ? But each time it's because I didn't give that little red knob a twist to release it. I'm sure you checked that.

Joe, Do you think it matters? instructions for saw vs shaper? I started another thread trying to determine proper tightening torque. Imran

The instructions I received with mine are instructions for the saw blade lock. Does anyone know if we are to do anything with the red flat blade screw? Sent: Wednesday, July 28, 2021 1:46 PM To:

I recently spent several hours on the phone with Felder this week sorting out a fault with my 2020 build KF700 SP, where my remote (slider-mounted) Start switch was working intermittently. Here are

Hi to all, and thank you for the responses. For some reason, they didn’t appear in my email. Imran told me to check the website. Then I saw everything, and now it’s also in my email. I have

Mike, my trail of frustration parallels yours about a year earlier; no start, suction, compressed air, circle the machine opening and re-closing lock out switches, unplug the machine, wait and cuss.

One of the switches in the “stop” circuit is open. Could be due to debris or a faulty/failed switch. There are probably four switches, all connected in series such that if any are open, the

Mike, I responded yesterday. If you did not get it in email my response is on FOG site. Imran

Nobody has an insight? Seems like a common problem...

?Thanks to Michael Marsico, received ProLock shaper spindle locking caps today. FWIW, there is an icon on top to indicate that the allen set/grub screw is the one to tighten. I did not know how this

Thanks to Michael Marsico, received ProLock shaper spindle locking caps today. FWIW, there is an icon on top to indicate that the allen set/grub screw is the one to tighten. I did not know how this